Windows Wireless Networking

PC and Router Traffic

Bill - 7 May 2005 8:35 PM - 4 messages

My PC is hard wired to a port on my Linksys WRT54G wireless router. Internet and LAN connections work fine. The LAN connection shows CONSTANT traffic between the PC and the Router which, over time, kluges everything on the PC until it basically stops and ...

sometimes cannot connect to the Internet

Winston Neo - 7 May 2005 12:58 PM - 3 messages

My pc is connected to the router by a wired port, this is a wireless router with wired ports. The router is connected to a cable modem. I have a Norton Internet Security, I am using the Norton firewall, and the Windows firewall is OFF. ...

WPA on startup

Navid - 7 May 2005 8:31 AM - 3 messages

If I have my router and windows configured to use WPA when my laptop boots up, the wireless card cannot connect to the router and it insteads gets a 169.254.xxx.xxx IP. If I then disable my wireless card and re-enable it, I get the correct ...

peer to peer wireless networking question?

Milsnips - 6 May 2005 10:12 AM - 5 messages

hi there, i tried connecting 2 laptops using peer to peer wireles, they both have b/g cards in them but always connect at 11mbs? is there some kinda restriction on this or am i doing something wrong here? thanks, ...

How to implement PEAP-EAP-TLD authentication?

Edward W. Ray - 6 May 2005 7:02 AM - 5 messages

I always use PEAP-EAP-MSCHAPv2 on my Windows 2003 IAS for wireless authentication. I already have a two-tier CA infrastructure, an my clients all have certificates for workstation, user and IPSec authentication. No Smart Cards yet. How do I go about getting the IAS/RADIUS server to recognize my workstation ...

Wireless Zero Configuration

Marksman007 - 6 May 2005 1:48 AM - 6 messages

I have just changed my wap to a Netgear WGR614 v5 from a linsys wap. Anyway, now when I start up my laptop I always have to go into Services and start the Wireless Zero Configuration. This a real pain in the butt. ...

How to get wireless Connection Secured

Rob - 5 May 2005 4:14 PM - 5 messages

I just bought a new Dell Inspiron and hooked up my wireless (netgear) router, etc.running windows xp and it got to the point of print out all the information about your Network name and key, but I can't find where to put it ...

wireless network protocol 802.11g+

Arcangel - 5 May 2005 2:49 PM - 2 messages

My problem is that I have bought a wireless network cardbus 100Mbps, but, when I put it on my notebook, windows detects it like if it was 54Mbps. I asked the proveedor and they told me that it was normal, because Windows ...

4-Way Handshake

Alexandr Mishagin - 5 May 2005 12:48 PM - 2 messages

Hello! _Sometime_, after i have performed 4-Way Handshake, when i start waiting for Message1 from Group Key Handshake, but AP sends to me strange EAPOL-key packet, like Message1 from 4-Way Handshake, except Key IV field (which contain some data). ...

wireless client won't accept WEP key

Dan - 5 May 2005 3:12 AM - 4 messages

I'm using XP SP2 on a Centrino notebook. When I try to configure the wireless connection for my router, the client (neither MS nor Intel) will retain the 128-bit key. When I close and reopen the setup, the 26 character hex has reverted back to some ...

Wireless networking on Win XP and Win 98

Kathryn - 5 May 2005 12:14 AM - 2 messages

I have two laptops. One running Win XP Pro and the other running Win 98se. I also have ADSL internet connect via a USB port to the XP laptop. I want to create a wireless network to share files, printers and the internet. ...

Connected on the network can not acess internet

TONYROME - 4 May 2005 4:10 PM - 2 messages

Can someone please help with this issue...I am connected to the wirless network, I can ping yahoo from the command line but I can not acess the internet through internet explorer. I deleted any dial up connections... ...

Disconnect and Reconnects

Richard Colinson - 4 May 2005 3:03 PM - 4 messages

hello I hope someone can help. We have a wired and wireless network as detailed below. All is well apart from the one laptop which usually connects via WiFi - Connection is fine but after varying periods of time - as long as 2 hours or as short as 5 minutes - it disconnects and ...

Printer sharing on Network

Davey Boy - 4 May 2005 12:20 PM - 2 messages

I am tryi ng to set up my printer to print from my laptop over a network at home. The printer is set to be shared over a network and can bee seen on the network. It is connected to the main PC via the USB port and I can print from that ...

Sporadic Internet with AOL

niallbruce - 4 May 2005 2:46 AM - 2 messages

My DSL internet connection is very stable but AOL seems to interfere. If the AOL software (UK version) is not loaded, Internet Explorer works away without any problem. Nonetheless, once I load AOL, my connection disappears after about 1 minute. ...

renew IP fails

E-Queen - 3 May 2005 11:41 PM - 4 messages

I've bought THREE new laptops in a week. I've returned the first two, thinking something is wrong with them, but now the third is doing it. When attempting to connect to my wireless network, I get excellent connectivity, but it won't assign a decent ip to it. It should be giving ...

Printing problems on a Home Wireless Network

highbury317 - 3 May 2005 8:41 PM - 3 messages

PC o/s Win Me connected to the wireless ADSL router via a LAN card and ethernet connection. Printer is attached to the PC via USB port. Laptop Win XP Home SP-2 is connected to PC & ADSL via wireless ...

Problem with IrDA in XP with SP2

tmatejko - 3 May 2005 2:00 PM - 2 messages

Similar problem I saw many times, but till now without right solution. So again problem description: - Notebook Compaq Evo N800v with IrDA port - IR enabled in BIOS - The newest SP2 & hotfixes, all files are available and they are in right ...

Disable the wireless network feature

Rajasekaran - 3 May 2005 12:52 PM - 2 messages

While experimenting with the wireless network feature I inadvertently set it up in Windows XP professional even though there was no wireless network adpter card /device. However now it indicates that it is set up and it is probably the reaons for ...

Auto-connect Bluetooth PAN

Jeff - 3 May 2005 9:39 AM - 3 messages

Hi all, I have got a bluetooth network setup at home but I have a small problem...I have to click connect everytime i reboot. Is there a way to get it to automatically connect everytime the PC boots, like a proper LAN connection? ...

Disconnecting

dkelling - 3 May 2005 2:50 AM - 2 messages

I am using a Dell laptop with buil-in wireless. I connect to my home wireless network with WEP encryption enable. I connect to the network and works okay for a few minutes. The it will say on bottom right that "one or wireless ...

Wireless Network Disconnecting

musicman0703 - 2 May 2005 7:21 PM - 4 messages

I got a Belkin Wireless Network Card, installed it in to the computer. Then, I installed the Belkin Software to configure the Wireless Connection. The signal strength is excellent, but after about five minutes of being connected it disconnects about every minute. It always reconnects right away, but I'm ...

bluetooth.

lynwalk - 2 May 2005 4:02 PM - 2 messages

I have a blue tooth usb adapter on my comp, but suddenly it's saying that I don't have a license for it, and it keeps closing the stacker down.....Anyone any clues please....Thankyou ...

Wireless for SMB

Curtis M - 2 May 2005 2:54 PM - 2 messages

Hello, We are looking for a good business class access point to sell to small to medium sized businesses. We have been selling the Linksys WAP54G but have not had good success with their performance in the business environment. ...

Belkin 125Mbps Router

Jari - 2 May 2005 2:49 PM - 3 messages

Hi just wondering if anyone could help me, i recently purchased a belkin 125 mbps router with a 125mbps belkin card. the router is not connected to any of my computers as they are located in rooms where there are no phone line ...

WAP-PSK configuration

Ray - 2 May 2005 11:09 AM - 6 messages

I am currently using WEP 128bit AP and clients. Since the AP is upgraded to WAP-PSK, can someone tell me how to configure to WAP-PSK on both AP and clients that is using Windows XP Pro SP2. ...

Missing Network Connection Icon

EdrickV - 2 May 2005 8:21 AM - 11 messages

The icon for my Belkin USB wireless ethernet adapter is missing from Network Connections and the system tray. I have already gone through the steps in KB article 825826 and they did not help at all. I have uninstalled and reinstalled the adapter multiple times. It is not ...

How to read data from WLAN card directly and bypassing the TCP/IP

Ketan. - 2 May 2005 2:02 AM - 2 messages

I am using Win XP and Netgear WLAN PCMCIA card. Everything works fine normally. I am working on a project in which I have created a small system with a microcontroller connected to a WLAN card. Microcontroller sends raw data to ...

How change user name on Linksys Router and Range Extender?

pattyjamas - 1 May 2005 10:18 PM - 5 messages

Perhaps someone can assist. I can change the password for the wrt54gs and wre54g products from Linksys but do not know how to put in a User Name for added security. Thanks for any assistance. Sincerely Patty ...

Inconsistent Wireless Connection

markgocubs - 1 May 2005 10:11 PM - 2 messages

I am having a problem maintaining a connection wirelessly. I do not have any problem finding a wireless network and I can connect to it fine. The problem exists when, lets say I leave the computer for an extended period of time, I ...

New windows (popups??)

c1287 - 1 May 2005 5:25 PM - 2 messages

I think I may have deleted something on my pc that enables new windows to appear/open whilst using internet explorer. Usually when you click on a hyperlink that opens a picture within a new window, that new, smaller window ...

Confirm my wireless understanding please?

Evil Uncle Chris - 1 May 2005 2:51 PM - 2 messages

Hi all, I am very new to wireless, so I really just need to have my understanding confirmed, hopefully. I have just got a Wifi enabled Pocket PC, 802.11b, (Axim X30) and want to sit 30-40 feet away from my PC surfing the web, on it, wirelessly. ...

Wireless LAN DHCP Issue

Fred - 1 May 2005 2:26 PM - 4 messages

This may or may not be the right place to ask this question. If not, I would appreciate it if you could point me in the right direction. I am setting up a Wireless LAN at work using Odyssey Client 3.03, with Cisco ...

Advice re. enabling network adaptor

Gary Jackson - 1 May 2005 8:37 AM - 3 messages

Hi, I'm running a wireless router and network adaptor with windows xp home. When I leave the PC for some time, my network connection has been disabled when I return and I have to re-enable it. Is there a way of keeping it enabled? The router stays connected ok. ...

Bluetooth Modem configuration

NivasC - 1 May 2005 6:08 AM - 2 messages

I have a bluetooth modem with my laptop,how can i make use of that and how to configure that. ...