Windows Wireless Networking

Cant See computers on Network

Oscar N. Fuentes-Guzman - 10 Feb 2007 7:44 PM - 2 messages

Good Morning, I have 3 computers connected to a DLink DI-624 Wireless Router, and all under the MSHOME workgroup. For some reason I cannot see any of the computers in the workgroup on my computer. (AEHSMCPS789-1) now if I go to the other two ...

Only one computer showing in workgroup

strixbubo - 10 Feb 2007 11:56 AM - 7 messages

I have two laptops. I am trying to connect them through a wireless network. I have followed the Windows procedure, it did'nt work. Someone told me I had to choose the "adhoc" settings and write a new address, ...

At least one of your changes was not applied successfully to the wireless configuration

ashkanjav - 9 Feb 2007 11:24 PM - 2 messages

Hi, i've beenhaving some problems recently with my wireless programs. Firstly, i have 2 desktops which are connnected by a router, both windows xp home edition, one of the computers is an access point, and this other computer has a Trendnet usb adaptor which connects it with ...

No connectivity.

Toobi Won Kenobi - 9 Feb 2007 8:37 PM - 3 messages

I have just started with a problem with my wireless desktop card. The PC was used in a "test rig" with a server to test some networking issues. Since joining and leaving the domain, I can no longer connect to the router. All ...

Adware Pop ups

Ryan - 9 Feb 2007 7:28 PM - 3 messages

Help please, I keep getting a pop up that says System Alert! telling me that there are a number of active spywares on my computer, and that I should select the baloon to remove the spyware, etc. Thing is, when I do that it takes me to site ...

Seurity Enabled Network

Ann hilferty - 9 Feb 2007 5:33 PM - 2 messages

I'm trying to securely enable my internet network. I just can't get round this process. Any help ...

Sharing Outlook Calendars over wireless

Mark - 9 Feb 2007 1:05 AM - 3 messages

Can you share Outlook calendars between two computers using a standard wireless router like you can files? ...

Wireless Network Printing

Skip1 - 8 Feb 2007 7:53 PM - 3 messages

My home network is comprised of three computers, two desktops & one laptop. One of the desktops is Ethernet wired through my Linksys WRT54G router and Cable modem. My printer is also connected to this computer. The other ...

Home is not accessable. you might not have permission to to use th

grapebird715 - 8 Feb 2007 6:50 PM - 2 messages

home is not accessible. you might not have permission to use this network resource. contact administrator of this server to find out if you have access permissions. The list of servers for this workgroup is currently not available. OK I have Three computers all running Windows XP. This computer is the main ...

Adding additional wireless router

Homer Jay - 8 Feb 2007 3:51 PM - 3 messages

I am hoping to connect an additional wireless router to my current set up to enable me to extend the range of my wireless network (using WDS). I am trying to get the wireless to work across 2 buildings. At the moment I have my cable modem coming into a Netgear FVL 328 wired ...

Where to get the "Wlanapi.h" and "Wlanapi.lib"

danial - 8 Feb 2007 1:24 PM - 3 messages

where can i get the Wlanapi.lib and Wlanapi.h to program wireless apps?? i have already installed the wireless api update for windows xp2. could anyone can tell me how to use it? It would be my honor if you can ...

Configuring a wireless network

HMS Surprise - 8 Feb 2007 12:36 PM - 3 messages

Greetings folks, First I will state that I know little about networking and Windows internals but we are a small company so we all have to pitch in and take on new challenges. I am to setup a travelling training network that will not be connected ...

Service name WSCSVC failes to start

Dag N - 8 Feb 2007 11:46 AM - 3 messages

Hi. I have installed 4 identical computers with WinXP with all service packs. For some reason one of the services do not starts even it is configured to start automaticly.. It is the following service:Wireless Zero Configuration (Service name ...

WLAN on vista

j.sjouw - 8 Feb 2007 8:46 AM - 3 messages

Hi, All off a sudden my WLAN stopped working on one of my laptops (L1) for a specific network, I see some networks but not the ones I'm supposed to see. (wlan is working fine on this laptop (L2) I'm on now). The ...

Internet connection broke

Dave - 8 Feb 2007 12:42 AM - 13 messages

I just used the internet last night, but when I awoke, I found that my internet is not working...I saw that my screen icon with green signal bars was missing and my PORT option in device manager is missing. I am in my Navy ...

Query

Capt K Ripendran - 7 Feb 2007 2:36 PM - 12 messages

I have a Compaq Presario desktop with Win Xp and a Acer Notebook (wireless) also with Win Xp. I also have 3 other desktops (HP & Compaq) with Win 98SE - totally 5 PC's.. All are Networked (4 at a time!) using a Black Box Router ...

Laptop can access Internet but not my computer or printer.

K-la - 7 Feb 2007 2:46 AM - 5 messages

I just recently bought a Toshiba Satellite with Windows Vista. I have a Trendnet wireless router connected to my PC. My laptop can access the internet and the PC can see my laptop in the network; however, my laptop ...

new laptop

leolady - 6 Feb 2007 9:28 PM - 35 messages

hi what can i say i am a woman with her very first laptop and i dont know how to set it up to get internet i want to keep the main pc for the kids and use laptop myself i brought a netgear wireless router and need help in setting it ...

wireless problem

hasnain00 - 6 Feb 2007 10:41 AM - 3 messages

i have tiscali broadband g modem router but i don't know how to create wireless network can any1 help me with detailed procedure i will be really thankfull to ya plz reply soon ...

Can not see shared network folders when using wireless

sean.brennan81 - 6 Feb 2007 10:18 AM - 3 messages

I am having a problem seeing my network shared folders when I use my laptops wireless connection. I have recently set up a home network with a desktop, a laptop and a belkin adsl wireless router. At first ...

Home wireless network dropping

Liz - 6 Feb 2007 5:26 AM - 3 messages

After 30 minutes, my home wireless network drops the connection. I can immediately get back on by logging off and logging back on my laptop...do I have setting wrong that is causing this? ...

WZC won't start

Cindy2007 - 6 Feb 2007 3:14 AM - 2 messages

I have a USB wireless connection that was working and then quit. This happened after clicking on a link from a website I was at that looked to be a good link. I did some research and found an article, 871122, that talked ...

problems with wireless network adapter (Broadcom)

eezenoj - 6 Feb 2007 1:19 AM - 5 messages

I recently bought a Gateway laptop - it had been working just great ( especially since it was/is very portable - I was able to make Internet connections quite easily anywheres wireless was available. Then I shut down the computer one night at work (exactly as I had always done previous) and ...

wireless network from belkin g-mimo+ router

Ann hilferty - 6 Feb 2007 12:48 AM - 2 messages

i'm wanting to security-enable my wireless network, i can't get past the wireless network properties section. The authentification defaults to open, and the next section disabled. I can't add a password when i change these settings. I'm earlier told to stay with the automatically assigned network ...

Backup network settings

Chris S - 5 Feb 2007 11:46 PM - 2 messages

I have some PCs that have been manually configured for various WLANs - I want to backup those settings onto a USB stick in such a way that after the PCs have been reloaded with a fresh copy of Windows I can resurrect my WLAN ...

Wireless Zero Config Profile in Group Policy

wauger - 5 Feb 2007 8:03 PM - 4 messages

Hello All, I need some clarification regarding one of the configuration options in the WZC profile for the GPO. When defining a wireless policy for my AD users there is an option stating "Use Windows to configure my wireless network settings". If I check this option and push the ...

Wireless network will not enable - device malfunctioning

Divafeva - 5 Feb 2007 5:34 PM - 4 messages

Hello - I am trying to get my wireless to work again. My roommates works no problem but mine says 'unavailable device malfuntioning' I do not have the Client for Microsoft Networks (I may have deleted it) that my roommate has. Any help ...

Wireless protocol

hassan_unibe - 5 Feb 2007 11:39 AM - 2 messages

Will the .net microframework support 802.11 a/b/g/? I believe that the bluetooth and zigby will be supported however I am still unclear as to how much support will be included in the .net microframework. Hassan U. ...

1 modem 2 networks

BMcC - 5 Feb 2007 11:09 AM - 8 messages

Hi, We are a small community based group hoping to provide short courses for the area. We have three office PCs on a wired network behind a Linksys router and a cable modem for the internet. We intend setting up another network for the ...

Help! Cannot get Music Bridge to connect to Buffalo network.

Bill & Debbie - 4 Feb 2007 11:53 PM - 2 messages

Had a wireless network up and running using Linksys's router, pcmcia card and their musical bridge. I decided to replace my Linksys router and pcmcia card with Buffalo's router and pcmcia card. The wireless network works fine ...

security

BnD - 4 Feb 2007 7:46 PM - 2 messages

Im a bit of a newbie and I was wondering how to make my wireless network secure? ...

Wireless Zero

Rush - 4 Feb 2007 6:17 PM - 3 messages

Common problem: When I start my computer, I always have to go in and turn on Wireless Zero even though its set to automatically come on. Then I have to go and select the option that I want windows to configure my wireless network ...

Admin rights for Users to setup WiFi connections

Todd - 4 Feb 2007 4:13 AM - 2 messages

I have an local IT policy in my company, that users cannot belong to the local administrators group on their PC's. That is fine while the user is at the office, But if the users travels and and needs to setup a wireless ...

Re: Networking Win and Mac machines over wireless

J.J. O'Shea - 4 Feb 2007 4:02 AM - 2 messages

On Fri, 18 Jun 2004 05:21:53 -0500, H Sridhar wrote (in article <BCF8BD49.4E0%hsrid***@vsnl.com>): Did you set NTFS security to allow access? This may help. <[link] ...

DLink DWLG510 & WPA

J.J. O'Shea - 4 Feb 2007 3:51 AM - 4 messages

Does anyone know how to get D-Link DWLG510 cards to work properly with a WPA key? I've got several machines on my home net, some wired, some wireless. Two wireless units are Macs, with built-in AirPort Extreme (11g, that is.) ...