|
windows
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
desktop wireless problemsI am trying to add a USB wireless adapter to a new desktop running XP Pro
and have failed repeatedly. I returned a Belkin as support was unable to assist. I now have Linksys RangPlus but have the same failure to connect to Internet. Everything seems to be set up right as I have repeated the install process many times. I can connect to other computers on the LAN but not outside. It says I am connected and I can see others in the nearby area as with laptop. This is a new System that has not been used yet so I am not expecting a virus. I have never downloaded anything yet. I have not installed any new applications other than AVG which I have removed. I turned off firewall but have run out of things to try. I was hoping someone might have ideas of what I might try. Thanks. Jake. Can you ping a public IP address like 4.2.2.1? Or posting the result of
ipconfig /all may help. -- Show quoteHide quoteBob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "Jake" <J***@Jake.not> wrote in message news:uuFQuWuHJHA.1304@TK2MSFTNGP02.phx.gbl... >I am trying to add a USB wireless adapter to a new desktop running XP Pro >and have failed repeatedly. I returned a Belkin as support was unable to >assist. I now have Linksys RangPlus but have the same failure to connect to >Internet. Everything seems to be set up right as I have repeated the >install process many times. I can connect to other computers on the LAN but >not outside. It says I am connected and I can see others in the nearby area >as with laptop. This is a new System that has not been used yet so I am not >expecting a virus. I have never downloaded anything yet. I have not >installed any new applications other than AVG which I have removed. I >turned off firewall but have run out of things to try. I was hoping someone >might have ideas of what I might try. > > Thanks. > > Jake. > > > Robert L. (MS-MVP) wrote:
> Can you ping a public IP address like 4.2.2.1? Or posting the result I am unable to get any response from a ping of any location.> of ipconfig /all may help. > ipconfig reports: Connection-specific DNS Suffix BELKIN IP Address 192.168.2.7 Subnet Mask 255.255.255.0 Default Gateway 192.168.2.1 Show quoteHide quote >> I am trying to add a USB wireless adapter to a new desktop running >> XP Pro and have failed repeatedly. I returned a Belkin as support >> was unable to assist. I now have Linksys RangPlus but have the same >> failure to connect to Internet. Everything seems to be set up right >> as I have repeated the install process many times. I can connect to >> other computers on the LAN but not outside. It says I am connected >> and I can see others in the nearby area as with laptop. This is a >> new System that has not been used yet so I am not expecting a virus. >> I have never downloaded anything yet. I have not installed any new >> applications other than AVG which I have removed. I turned off >> firewall but have run out of things to try. I was hoping someone >> might have ideas of what I might try. Thanks. >> >> Jake. If starting the computer with clean boot, can you ping?
Windows general How to run Windows OS with a clean boot · How to Run Windows Safe Mode with Networking · How to setup DHCP for IP Phone How to sort programs in Start ... www.howtonetworking.com/Windows/windowsgeneral.htm -- Show quoteHide quoteBob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "Jake" <J***@Jake.not> wrote in message news:%23R0S7G0HJHA.1156@TK2MSFTNGP04.phx.gbl... > > > Robert L. (MS-MVP) wrote: >> Can you ping a public IP address like 4.2.2.1? Or posting the result >> of ipconfig /all may help. >> > I am unable to get any response from a ping of any location. > > ipconfig reports: > > Connection-specific DNS Suffix BELKIN > IP Address 192.168.2.7 > Subnet Mask 255.255.255.0 > Default Gateway 192.168.2.1 > > > > >>> I am trying to add a USB wireless adapter to a new desktop running >>> XP Pro and have failed repeatedly. I returned a Belkin as support >>> was unable to assist. I now have Linksys RangPlus but have the same >>> failure to connect to Internet. Everything seems to be set up right >>> as I have repeated the install process many times. I can connect to >>> other computers on the LAN but not outside. It says I am connected >>> and I can see others in the nearby area as with laptop. This is a >>> new System that has not been used yet so I am not expecting a virus. >>> I have never downloaded anything yet. I have not installed any new >>> applications other than AVG which I have removed. I turned off >>> firewall but have run out of things to try. I was hoping someone >>> might have ideas of what I might try. Thanks. >>> >>> Jake. > > Robert L. (MS-MVP) wrote:
> If starting the computer with clean boot, can you ping? Thanks for a very helpful link Robert. I ran msconfig exactly as suggested > Windows general > How to run Windows OS with a clean boot · How to Run Windows > Safe Mode with Networking · How to setup DHCP for IP Phone How to > sort programs in Start ... > www.howtonetworking.com/Windows/windowsgeneral.htm and now I have the wireless connection. However I have no idea what has changed. I simply restored it to Normal Startup and that did it. Show quoteHide quote > > >> >> >> Robert L. (MS-MVP) wrote: >>> Can you ping a public IP address like 4.2.2.1? Or posting the result >>> of ipconfig /all may help. >>> >> I am unable to get any response from a ping of any location. >> >> ipconfig reports: >> >> Connection-specific DNS Suffix BELKIN >> IP Address 192.168.2.7 >> Subnet Mask 255.255.255.0 >> Default Gateway 192.168.2.1 >> >> >> >> >>>> I am trying to add a USB wireless adapter to a new desktop running >>>> XP Pro and have failed repeatedly. I returned a Belkin as support >>>> was unable to assist. I now have Linksys RangPlus but have the same >>>> failure to connect to Internet. Everything seems to be set up right >>>> as I have repeated the install process many times. I can connect to >>>> other computers on the LAN but not outside. It says I am connected >>>> and I can see others in the nearby area as with laptop. This is a >>>> new System that has not been used yet so I am not expecting a >>>> virus. I have never downloaded anything yet. I have not installed >>>> any new applications other than AVG which I have removed. I turned >>>> off firewall but have run out of things to try. I was hoping >>>> someone might have ideas of what I might try. Thanks. >>>> >>>> Jake. Thank you for the feedback.
-- Show quoteHide quoteBob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "Jake" <J***@Jake.not> wrote in message news:%23UH3JBIIJHA.3496@TK2MSFTNGP05.phx.gbl... > > > Robert L. (MS-MVP) wrote: >> If starting the computer with clean boot, can you ping? >> Windows general >> How to run Windows OS with a clean boot · How to Run Windows >> Safe Mode with Networking · How to setup DHCP for IP Phone How to >> sort programs in Start ... >> www.howtonetworking.com/Windows/windowsgeneral.htm > > Thanks for a very helpful link Robert. I ran msconfig exactly as suggested > and now I have the wireless connection. However I have no idea what has > changed. I simply restored it to Normal Startup and that did it. > >> >> >>> >>> >>> Robert L. (MS-MVP) wrote: >>>> Can you ping a public IP address like 4.2.2.1? Or posting the result >>>> of ipconfig /all may help. >>>> >>> I am unable to get any response from a ping of any location. >>> >>> ipconfig reports: >>> >>> Connection-specific DNS Suffix BELKIN >>> IP Address 192.168.2.7 >>> Subnet Mask 255.255.255.0 >>> Default Gateway 192.168.2.1 >>> >>> >>> >>> >>>>> I am trying to add a USB wireless adapter to a new desktop running >>>>> XP Pro and have failed repeatedly. I returned a Belkin as support >>>>> was unable to assist. I now have Linksys RangPlus but have the same >>>>> failure to connect to Internet. Everything seems to be set up right >>>>> as I have repeated the install process many times. I can connect to >>>>> other computers on the LAN but not outside. It says I am connected >>>>> and I can see others in the nearby area as with laptop. This is a >>>>> new System that has not been used yet so I am not expecting a >>>>> virus. I have never downloaded anything yet. I have not installed >>>>> any new applications other than AVG which I have removed. I turned >>>>> off firewall but have run out of things to try. I was hoping >>>>> someone might have ideas of what I might try. Thanks. >>>>> >>>>> Jake. > >
question about switching from WEP to WAP
Command that returns Signal strength, and/or speed Question Two Networks - One PC wireless modem and clearing connection How do I set up a laptop to use on my wireless connection printer sharing on home network Vista Asks for XP Password No LAN Port on PC - How do I set up Wireless on an existing Broadband account ? simultaneous LAN and WAN connections in windows XP |
|||||||||||||||||||||||