|
windows
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
How do I disconnect from a network share?After connecting to a network share successfully that requires me to log in (user name and password) through a shortcut or manually (e.g., \\192.168.1.123\), how do I disconnect so that when I connect again without a reboot, I get a password prompt again since I am using shared machines (Windows 2000 and XP; good to know for Vista too if it is different). Thank you in advance. :) -- "What reason, like the careful ant, draws laboriously together, the wind of accident sometimes collects in a moment." --Friedrich von Schiller /\___/\ / /\ /\ \ Phillip/Ant @ http://antfarm.ma.cx (Personal Web Site) | |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net \ _ / Remove ANT from e-mail address: philpi@earthlink.netANT( ) or ANT***@zimage.com Ant is currently not listening to any songs on his home computer. Ant wrote:
> Hello! Hi Ant,> > After connecting to a network share successfully that requires me to > log in (user name and password) through a shortcut or manually (e.g., > \\192.168.1.123\), how do I disconnect so that when I connect again > without a reboot, I get a password prompt again since I am using > shared machines (Windows 2000 and XP; good to know for Vista too if > it is different). > > Thank you in advance. :) This should help you, Net session http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/net_session.mspx?mfr=true Net config http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/net_config_server.mspx?mfr=true -- William Crawford MS-MVP Windows Shell/User On 11/23/2007 2:37 PM PT, WTC typed:
Show quote >> After connecting to a network share successfully that requires me to That doesn't seem to work:>> log in (user name and password) through a shortcut or manually (e.g., >> \\192.168.1.123\), how do I disconnect so that when I connect again >> without a reboot, I get a password prompt again since I am using >> shared machines (Windows 2000 and XP; good to know for Vista too if >> it is different). > > Hi Ant, > > This should help you, > > Net session > http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/net_session.mspx?mfr=true > > Net config > http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/net_config_server.mspx?mfr=true C:\>net config workstation Computer name \\foobar Full Computer name foobar User name user Workstation active on NetbiosSmb (000000000000) NetBT_Tcpip_{32E2E3DA-2294-480F-B978-1B6192E145AF} (0016179432D6) NetBT_Tcpip_{20170527-3DEF-4363-8D48-F4828937969E} (005056C00001) NetBT_Tcpip_{A668F481-2E02-447A-AC6E-D905910DCBA9} (005056C00008) Software version Windows 2002 Workstation domain wd Workstation Domain DNS Name (null) Logon domain foobar COM Open Timeout (sec) 0 COM Send Count (byte) 16 COM Send Timeout (msec) 250 The command completed successfully. C:\>net session There are no entries in the list. I tried with two XP SP2 machines too. I even checked to see my share session was still working. Is it because the computer I am sharing with is using Samba on Debian/Linux? -- "What is it all but a trouble of ants... In the gleam of a million... million of suns? --Alfred Lord Tennyson /\___/\ / /\ /\ \ Phillip/Ant @ http://antfarm.ma.cx (Personal Web Site) | |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net \ _ / Remove ANT from e-mail address: philpi@earthlink.netANT( ) or ANT***@zimage.com Ant is currently not listening to any songs on his home computer. Ant <philpi@earthlink.netANT> wrote:
>Hello! If I understand you properly you just want to drop the connection> >After connecting to a network share successfully that requires me to log >in (user name and password) through a shortcut or manually (e.g., >\\192.168.1.123\), how do I disconnect so that when I connect again >without a reboot, I get a password prompt again since I am using shared >machines (Windows 2000 and XP; good to know for Vista too if it is >different). > >Thank you in advance. :) credentials so you are required to authenticate the next time. If so, open a command prompt and tyoe "NET USE". This will show you your current connections so if you're mapped using a drive letter you could type "NET USE X: /d" where X: is the drive. If you are not mapped via a drive you coult type "NET USE \\192.168.1.123\c$ /d" (or whatever your share name is)" Also, if you simply connected usijng an IPC it might not show us but you could always try "NET USE \\192.168.1.123\ipc$ /d" to be sure... HTH Ha®®y HarryKrishna.nospam@online.ie On 11/24/2007 7:29 AM PT, harrykrishna.nospam@online.ie typed:
Show quote >> After connecting to a network share successfully that requires me to log Thank you!!! NET USE \\192.168.1.123\ipc$ /d" was it! :) Do I assume >> in (user name and password) through a shortcut or manually (e.g., >> \\192.168.1.123\), how do I disconnect so that when I connect again >> without a reboot, I get a password prompt again since I am using shared >> machines (Windows 2000 and XP; good to know for Vista too if it is >> different). >> >> Thank you in advance. :) > > > If I understand you properly you just want to drop the connection > credentials so you are required to authenticate the next time. If so, > open a command prompt and tyoe "NET USE". This will show you your > current connections so if you're mapped using a drive letter you could > type "NET USE X: /d" where X: is the drive. > > If you are not mapped via a drive you coult type "NET USE > \\192.168.1.123\c$ /d" (or whatever your share name is)" > > Also, if you simply connected usijng an IPC it might not show us but > you could always try "NET USE \\192.168.1.123\ipc$ /d" to be sure... this works for 9x, 2000, and Vista as well? -- "I killed an ant, now all my relatives are afraid of me." --unknown /\___/\ / /\ /\ \ Phillip/Ant @ http://antfarm.ma.cx (Personal Web Site) | |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net \ _ / Remove ANT from e-mail address: philpi@earthlink.netANT( ) or ANT***@zimage.com Ant is currently not listening to any songs on his home computer. Ant <philpi@earthlink.netANT> wrote:
Show quote >On 11/24/2007 7:29 AM PT, harrykrishna.nospam@online.ie typed: You're welcome.> >>> After connecting to a network share successfully that requires me to log >>> in (user name and password) through a shortcut or manually (e.g., >>> \\192.168.1.123\), how do I disconnect so that when I connect again >>> without a reboot, I get a password prompt again since I am using shared >>> machines (Windows 2000 and XP; good to know for Vista too if it is >>> different). >>> >>> Thank you in advance. :) >> >> >> If I understand you properly you just want to drop the connection >> credentials so you are required to authenticate the next time. If so, >> open a command prompt and tyoe "NET USE". This will show you your >> current connections so if you're mapped using a drive letter you could >> type "NET USE X: /d" where X: is the drive. >> >> If you are not mapped via a drive you coult type "NET USE >> \\192.168.1.123\c$ /d" (or whatever your share name is)" >> >> Also, if you simply connected usijng an IPC it might not show us but >> you could always try "NET USE \\192.168.1.123\ipc$ /d" to be sure... > >Thank you!!! NET USE \\192.168.1.123\ipc$ /d" was it! :) Do I assume >this works for 9x, 2000, and Vista as well? It should work for all OS I believe. You will likely need to open an elevated CMD prompt in Vista (Run as Administrator) although I'm not sure... Ha®®y HarryKrishna.nospam@online.ie Hi
It should work with all windows OS. Hi You actually can create small text files on these commands save them with bat (for batch) extension, and drag an Link/Icon to a place of your choice. Double click on the Icon and the connection Gone. Jack (MVP-Networking). Show quote "Ant" <philpi@earthlink.netANT> wrote in message news:OZVL7FuLIHA.3516@TK2MSFTNGP02.phx.gbl... > On 11/24/2007 7:29 AM PT, harrykrishna.nospam@online.ie typed: > >>> After connecting to a network share successfully that requires me to log >>> in (user name and password) through a shortcut or manually (e.g., >>> \\192.168.1.123\), how do I disconnect so that when I connect again >>> without a reboot, I get a password prompt again since I am using shared >>> machines (Windows 2000 and XP; good to know for Vista too if it is >>> different). >>> >>> Thank you in advance. :) >> >> >> If I understand you properly you just want to drop the connection >> credentials so you are required to authenticate the next time. If so, >> open a command prompt and tyoe "NET USE". This will show you your >> current connections so if you're mapped using a drive letter you could >> type "NET USE X: /d" where X: is the drive. >> >> If you are not mapped via a drive you coult type "NET USE >> \\192.168.1.123\c$ /d" (or whatever your share name is)" >> >> Also, if you simply connected usijng an IPC it might not show us but >> you could always try "NET USE \\192.168.1.123\ipc$ /d" to be sure... > > Thank you!!! NET USE \\192.168.1.123\ipc$ /d" was it! :) Do I assume this > works for 9x, 2000, and Vista as well? > -- > "I killed an ant, now all my relatives are afraid of me." --unknown > /\___/\ > / /\ /\ \ Phillip/Ant @ http://antfarm.ma.cx (Personal Web Site) > | |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net > \ _ / Remove ANT from e-mail address: philpi@earthlink.netANT > ( ) or ANT***@zimage.com > Ant is currently not listening to any songs on his home computer.  |
|||||||||||||||||||||||
Other interesting topics