|
windows
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
Windows XP Networkingmicrosoft.public.windowsxp.network_web
jsdranger -
12 Aug 2006 9:35 PM - 5 messages
How can i go about setting up a home network with a server using a cable modem and a linksys 802.11B router I have installed server 03 with a domain, and would like it to act as a file/print/DNS/AD server. ...
susan -
12 Aug 2006 7:42 PM - 6 messages
when i try to open OE i get this message MSOE.DLL cannot be found i haven,t added or removed any programs and everything was ok till yesterday any ideas where i start? ...
Susan L. -
12 Aug 2006 7:06 PM - 2 messages
I have two computers on the same network (WindowsXP Home edition), one wireless, one directly connected. Both can get to the internet through the router/cable modem. Both belong to the same workgroup, but neither can see the other. I made sure that the NETBIOS over TCP/IP was "on", and restarted ...
KatastrophicIAm -
12 Aug 2006 4:50 PM - 7 messages
Hi, i am currently using a Netgear 4port FireWall router model WGT624, I am connected to the internet using Bellsouth DSL and i have a 3mbps connection. Now my problem is when it rains for long periods of time my router ...
mives -
12 Aug 2006 4:13 PM - 3 messages
When I try to enable the Windows Firewall I get a message that reads "Windows Firewall settings cannot be displayed because the associated service is not running. Do you want to start the Windows Firewall/Internet Connection sharing Service?". ...
Tom -
12 Aug 2006 2:59 PM - 3 messages
I put an HP printer on my small peer-to-peer home network. When I print an information page and see the address 192.168.1.105 for example - I then can set the port configuration to go to that location. ...
Alnafarmer -
12 Aug 2006 2:28 PM - 2 messages
I have installed a camera system on my XP Pro, this system can be view from the web using port 9000 and 9001, but for some reason this ports are not open, i open all the ports on the firewall of my router a 2wire dsl router ...
Scottish Mo -
12 Aug 2006 11:04 AM - 2 messages
Whilst going through the NETWORK SET UP WIZARD SCREENS, I can go through all the screens until I come the " create network disk screen" when I choose NEXT at this point, I get a message up saying " the wizard had detected that the computer has no floppy disk drives or ...
jg -
12 Aug 2006 9:14 AM - 4 messages
I can send and recieve email fine (thunderbird and outlook) but IE and firefox both return 'cannot display the webpage' or 'cannot connect' messages. This happens both at home and college. Both connections are fine as have tested with other machines. ...
ahmad.humyn -
12 Aug 2006 8:01 AM - 3 messages
Hello everyone I am going through some trouble, which I cant figure out how to solve. I have a computer which I have to connect to a VPN through dial-up, which I havedone pretty easily. But I have to remotely access that same ...
Sonny Martin -
12 Aug 2006 6:39 AM - 2 messages
I have a Toshiba Satellite L25-S119 notebook computer with a built in wireless nic and and LAN connection. While the notebook is connected via the LAN connection it never has any problems. But, when I connect via the wireless nic then it will get knocked ...
Edith75 -
12 Aug 2006 2:15 AM - 2 messages
Hope anybody can help ! My network at home was doing fine up to yesterday afternoon. 2 Computers : 1 desktop and 1 laptop. Both connecting to Internet broadband using PPP autentication ( leptop over a wireless ). The desktop still works fine but the laptop now reports the following while logon : ...
Nathan Sokalski -
11 Aug 2006 10:34 PM - 8 messages
When I go to My Network Places -> Entire Network -> Microsoft Windows Network -> Natehome in Windows Explorer and click on Natehome (the name of the workgroup), I receive the following error: However, if I manually enter the name of my computer in the address bar using the format \\mycomputername it shows it as a child of Natehome in the hierarchy and lets me browse the children of \\mycomputername. The only network my computer is on is a home network (although I am the only one with this as the name of the workgroup, and all the others are usually turned off), and I use Windows XP Pro SP2. What do I need to do in order to be able to browse to my own machine in Microsoft Windows Network? I'm sure it is something simple, but I'm not sure what. Thanks. ...
columbo -
11 Aug 2006 9:27 PM - 4 messages
I am fairly new to all of this, so please bear with me. I have my desktop connected to the internet via a Belkin_Pre_N_Router and cable modem. My Laptop is connected wirelessly to the internet via the same router. Both connect to the internet with no problems. I want to share ...
Gerald Vogt -
11 Aug 2006 8:17 PM - 6 messages
I have a computer here that more and more gets into a state where networking is completely dead. After a reboot, although the network adapters are O.K. in the device manager and the network connections look normal in the network connections panel (expect that they are not ...
nofx1728 -
11 Aug 2006 7:34 PM - 2 messages
I'm having a situation. I have 3 computers on a network. I have bellsouth dsl, and a wireless linksys router. Two of the computers are hooked up with cables, and a laptop is wireless. They have been on the same workgroup, ...
Al -
11 Aug 2006 6:05 PM - 2 messages
Might someone please tell me how to sort my 'favorites' list; and to sort the sub-files under each favorite? Mine are getting extensive enough to need them alphabetized.... ...
illusis -
11 Aug 2006 5:13 PM - 4 messages
I have the following problem. My system use to be working fine until recently the network connection icon disappeared. I have both 1394 firewire connection and normal network connection installed on my PC and now both are disappeared. I'm still able to access the internet through the network and ...
Marcus Mender -
11 Aug 2006 8:48 AM - 3 messages
I can add net network places into my Windows Explorer by the usual way: Right click on the desktop icon "My Network Places"->Open->Add...->Wizard Assume I have now setup a remote network folder with the wizard. ...
fmajor7 -
11 Aug 2006 8:13 AM - 3 messages
I would really appreciate if someone can help me with this strange problem I have developed. I have four PCs at home all using a US Robotics Router to connect to the Internet. One is Win XP with SP1 me) ...
Werner Pretorius -
11 Aug 2006 7:17 AM - 3 messages
Hi, if anybody can help me please! I want to backup data from my live server in another city trough vpn, but i want to scedule a backup, but how can vpn starts at certain times, if possible. Thanks Werner Pretorius ...
oilfieldhottie -
11 Aug 2006 5:12 AM - 5 messages
I have been trying to set up a home network with a shared internet connection between two PCs for 36 hours straight now and I believe it can not be done. I hope someone can tell me otherwise because I won't rest until I get this to ...
tedoniman -
11 Aug 2006 4:45 AM - 5 messages
Win XP Pro SP2 / 256 MB RAM / Intel Celeron 2.66 GHz Excess Unknown Internet activity Of late, noticing a lot of background Internet activity. I'm on a small home-net LAN w/ each comp connected to a hub ...
Yachnin -
11 Aug 2006 4:12 AM - 8 messages
Hi. I have a network of three Win XP Home SP2 computers and one WinME computer networked using a US Robotics wireless router. One of the WinXP computers (called Main) does not show up in the MSHOME workgroup, where it is ...
Donald -
11 Aug 2006 2:51 AM - 10 messages
I just bought a new computer with winXP. I'm trying to connect on my labtpop with or without a router and I'm not able. I ran may times the wizard, I installed on my labtop the program that the ...
zinedunc -
10 Aug 2006 10:53 PM - 4 messages
Hi all, wonder if someone could give me some guidance on a problem I'm having? I have a Safecom Wireless LAN USB adapter (model SWLUZ-5400) and had it running on my Win XP SP2 machine quite happily for months. I then had ...
thejynxed -
10 Aug 2006 5:53 PM - 2 messages
The trouble I am having, is that I can't access any Microsoft domain (except Hotmail, and even that is iffy at times) from my Windows XP Pro computer with SP2. I can connect to other sites just fine, but when I try to connect to MS, it ...
pleasantlake -
10 Aug 2006 4:21 PM - 2 messages
I recently installed a new windows XP PC on my network and a email account on Outlook Express. Then I went to other windows xp PC's and set up the same account in Outlook Express. I can't view the messages in the Inbox on these ...
Boogieman_Nightmare@msn.com -
10 Aug 2006 3:51 PM - 2 messages
I need to transfer files from one pc to the next. They both have network (LAN) adapters, and I have a crossover cable. After plugging in the cable, what do I need to do to start sharing files between them? ...
johnmsh -
10 Aug 2006 1:52 PM - 2 messages
I have a PC connected to broadband by cable from ethernet to modem. I would like a second PC to have access to this broadband connection. Can I do this by installing a network card in both computers and joining via a crossover ...
Jeff -
10 Aug 2006 1:12 PM - 13 messages
I am having a sharing problem I think. I have a desktop pc running Windows XP PRO and a laptop also running Windows XP PRO. They are both networked through my wireless router D-Link DI524. Internet and ...
Nathan Sokalski -
10 Aug 2006 5:50 AM - 5 messages
I am trying to lock my Windows XP Pro machine (I am the administrator). When I press CTRL+ALT+DEL the Windows Task Manager window comes up. When I looked under locking a computer -> securing your computer in Help and Support, it says to press CTRL+ALT+DEL and click Lock Computer. ...
Ramesh -
10 Aug 2006 4:43 AM - 3 messages
Hi, I use a laptop with which I share data with another desktop. There s another standalone desktop which requires to share the Internet connection which I have on my laptop. Right now I only have a one to one crossover ...
Ramesh -
10 Aug 2006 4:39 AM - 4 messages
Hi, Recently I had installed Firefox browser and set it up as default browser. Now I have some programs not working well and some sites not displaying properly and I d like to restore IE as default. How do I do that? I checked the option asking IE to check if its the ...
Ryan -
10 Aug 2006 2:07 AM - 2 messages
I have a home network using XP Home as my main computer. I am trying to configure a Windows 2000 Professional computer to access the internet wirelessly from my XP Home computer. I have enabled ICS in my XP Home computer and my Windows 2000 computer shows ...
podgorny -
9 Aug 2006 11:57 PM - 3 messages
I currently have Verizon DSL, I purchased a wireless router, as I try to install it, it states that it found my old Verizon router and that I must change its IP address not to interfere with the wireless router. ...
pclax -
9 Aug 2006 9:50 PM - 5 messages
I have a desktop and wireless laptop. Both are connected to the internet through a wireless router. I want to be able to share the printer that is connected to the desktop. Can I do this, and how? ...
Bob Phillips -
9 Aug 2006 8:49 PM - 2 messages
Can somebody help me, networks are not my forte? We have a wireless network setup, a Netgear DSL Router connected to a file/print server. Up until yesterday, this was all working fine, we could access the shared server directories from our laptops, we could print to the ...
Dr Teeth -
9 Aug 2006 8:46 PM - 51 messages
I have three PCs on my LAN, all running Win XP SP2 fully patched. The problem is that PC1 can not see PC2; PC3 can see PC2; PC1 can see PC3. To get stuff to PC2, I had to send it via PC3. It is not quite as ...
24 -
9 Aug 2006 5:26 PM - 3 messages
We have a LAN (W2K Server with XP clients) and there used to be 6 workstations (clients) but we had to downsize and we're down to 2 users now. My question is simply: should we hold on to our small LAN (there is hardly ...
sync_303 -
9 Aug 2006 5:24 PM - 3 messages
Hi, I want to add a computer to our network here at work. This computer will be replacing a computer we are currently using but that is now old and slow. The computer will be running SQL and serves images to our employees ...
dbspl1 -
9 Aug 2006 4:59 PM - 2 messages
i have 4 computers connected to linksys router (2 wired with xp home, 2 w/l with xp pro) all connected to a common workgroup. i have an hp photosmart 2710xi wired to the router. all computers can see, access, and print to the ...
David -
9 Aug 2006 4:22 PM - 11 messages
I've got two XP machines on my home network (linksys wrk54g) that I'm moving ~14Gb of data between. Now, I don't expect the full 100Mb/s throughput but it seems to be exceedingly slow. In about 12 hours, I've ...
Jazza -
9 Aug 2006 2:47 PM - 3 messages
Hello, I have two PCs, one with XO PRO and one with XP HOME. I want to network them together for file, printer and internet sharing. At present I have been able to have the XP HOME PC reading the shared files ...
churin -
9 Aug 2006 2:41 PM - 7 messages
What does WOL allow us to do? Can I turn on and off my PC at home from other PC via the internet? If so then what preparation I need to make with my PC and its periperal devices at home before I leave home? ...
jeffuk123 -
9 Aug 2006 12:16 PM - 4 messages
Hi I constantly endure problems sharing a printer to an XP Home PC from an XP Professional, what am I doing incorrectly or is this a common issue? Also, can a printer be shared from XP home to XP Prof? ...
Markus -
9 Aug 2006 9:03 AM - 4 messages
Hallo I hope some on can help me i have installed the IIS part of windows XP and i setup a website on it and it works fine but to access it the other people in my company need to know the machine name for it. So what i would like to do ...
Marcus Mender -
9 Aug 2006 5:53 AM - 3 messages
In a LAN network I can map directly a remote shared folder without problems with a command like net use T: \\192.168.1.200\remotesharefolder /USER:karl A command prompt pops up asking me for the password of remote user "karl". After entering it ...
Ian B -
9 Aug 2006 4:54 AM - 2 messages
I have a wireless router, 2 x XPPro PC's, 1 hardwired to router (works OK with internet), other wireless to router. Worked for 12 months and just stopped. I have also lost internet and connectivity between PC's ...
vraissi -
9 Aug 2006 2:34 AM - 2 messages
Hi, We have three computers (desk and lap) and we share an internet connection using a wireless network. We use cable service which is connected to a cable modem and then a router. The point is that we tried to enable WEP or any other security ...
lodi -
9 Aug 2006 1:37 AM - 2 messages
I just bought a new computer and added it to my network. I have three pc's and one laptop. All access the internet with no problem. The new one in the network neighborhood sees only itself. On all of the others on the network, ...
gberry1969 -
8 Aug 2006 8:54 PM - 6 messages
I'm having difficulty in getting file and printer sharing going on two computers that are connected via a Belkin wireless router. Both computers are running on XP Home Edition. By looking at other questions here I found ...
lurker -
8 Aug 2006 7:55 PM - 4 messages
I am trying to save data from an expired Windows 95 system. He was using an ancient DOS program called FIRST1. He has some spread sheets that are needed. I installed the hard drive as a slave on my dual boot Windows 2000 / Windows XP Home computer. ...
mrwawa -
8 Aug 2006 5:06 PM - 3 messages
Hi all, I am trying to create my first home network and having problems. I have installed a wireless router and am able to access the internet with both the desktop (directly connected via cable) and a wireles laptop. The wireless router is connected to a modem and a printer is ...
Rich Wethington -
8 Aug 2006 2:35 PM - 4 messages
The workstation service is missing from my computer's list of services. How can I reinstall this service? Thanks, Rich ...
John Hupp -
8 Aug 2006 1:37 PM - 3 messages
For computers that have more than one active high-speed Internet connection (e.g. Ethernet LAN and wireless LAN), how does Windows XP or Internet Explorer choose which connection to use? Can I read or set the connection selection order in some GUI interface or the Registry? ...
argee -
8 Aug 2006 11:53 AM - 5 messages
Hi all, I have a wireless router to which my home computer is wired, and my work laptop connects through wifi. I've shared my printer through the network and all seems well. I can print from both comps. When I use ...
Joachim -
8 Aug 2006 9:17 AM - 6 messages
What rules are there that decides which network adapter (assuming I have several network adapters on my PC) network information uses to send information on a Windows XP Pro PC? ...
Jothi -
8 Aug 2006 9:16 AM - 3 messages
Hi All, I am using Windows Vista for my network application development under administrator login(full access). I am trying to add a route to the exisisting route table using CreateIpForwardEntry API. I am getting following error. "160 - One or more argument are not correct." . ...
sskagent -
8 Aug 2006 4:45 AM - 8 messages
I have a 6 to 4 pin IEEE 1394 cable I'm trying to use in connecting a laptop and a pc both with XP. The connection shows as being connected(in the system tray) and everything, but in Network places ...
Prashant -
8 Aug 2006 4:44 AM - 4 messages
Hello All, I have 2 computers connected on a network, with a router. The Router is connected to a cable modem. Both the computer are part of workgroup "HOME". In explorer I can see both computers on "My Network Places" as "compA" and ...
ုKo Zaw (ကá€á€¯á€±á€‡á€¬á€¹) -
8 Aug 2006 4:25 AM - 6 messages
pc-a & pc-b connected with rj-45 vis a switch. Having same workgroup "MSHOME". pc-a ping to pc-b "OK". pc-b ping to pc-a "OK". both pcs TCP/IP is configured for file & printer sharing & client for ms ...
Michael T. -
8 Aug 2006 3:05 AM - 2 messages
Looking for shareware/freeware that will display the incoming packets for my network adapter. For example, if you display Network Connections (from the Control Panel) and right-click Local Area Connection you can select STATUS from the menu. This will display received packets in the Activity section. ...
gberry1969 -
8 Aug 2006 2:23 AM - 7 messages
I have two laptops running XP Home Addition that I am trying to network thru a Belkin wireless router. One laptop is connected via an ethernet cable and the other via wireless. I've run the home or small office wizard indicating ...
billy -
8 Aug 2006 1:45 AM - 6 messages
I have a few machines that are running Win XP Pro. I am creating a network share however i am not able to set the password on the network share. Is pw only able to set on domain but not workgroup? thanks ...
Joel -
8 Aug 2006 12:33 AM - 8 messages
I have a desktop and a laptop going through linksys router. I ran the XP home network setup and clicked all the default buttons during the process that said "other connection." I even did a system restore, started over, and ...
Ricardo -
7 Aug 2006 11:37 PM - 8 messages
I presume that the icf to be configured requires that the network computers are connected to the internet, but if I use a router ( a residential gateway ) I choose that each computer connects to the internet through the router. ...
¦ce -
7 Aug 2006 10:35 PM - 2 messages
I still cannot access [link] I've tried several suggestions from MTU fixes to dns flushes Any HELP pls?? ...
sergiogroups -
7 Aug 2006 10:26 PM - 2 messages
I have my home PC with IP 1.2.3.4 and a shared_folder. How can I make this folder network 'mapable' at my work, like going to MyComputer -> Tools -> Map Netwok Drive..., Folder: \\1.2.3.4\shared_folder . Is ...
JoKing -
7 Aug 2006 8:53 PM - 2 messages
I've a client with a Laptop WinXP Pro and wireless capable. He wants to connect wirelessly to his homes wireless router, then take his laptop to his office and connect wirelessly there, and then out on the road to various ...
paislisa -
7 Aug 2006 8:24 PM - 4 messages
hi, apparently (through my research) my isp cache is not refreshing and therefore if i go to a site that has had some changes (ie...yahoo) i am not seeing them on my pc, but i do see them elsewhere (on other pc's). not sure ...
Curtis -
7 Aug 2006 7:43 PM - 3 messages
I have one comp that I want to transfer some picture & music files from to another comp. Can I just USB them together for a short transfer? XP pro 1 on first comp to XP Home 2 on second comp. I just want to keep it simple for ...
LEBANON -
7 Aug 2006 7:30 PM - 3 messages
On the 15th Day of The Israeli Aggression : A total of 958 deaths since the beginning of the war,
over 3,369 wounded, 915,762 Displaced, and the world is still silent!
THIS IS THE LEAST WE COULD DO FOR : LEBANON!
Look at those pictures
[link][link][link][link][link][link][link][link][link][link][link][link][link][link][link]
Tell your friends about what is going on! ...
Wim VAN PAEPEGEM -
7 Aug 2006 6:53 PM - 4 messages
Dear all, I have a home computer with Windows 2000 SP4 installed and an ADSL USB modem to dial-up to the Internet. My laptop from work has Windows XP Professional SP2 installed. If I bring home my office laptop, I would ...
SAT -
7 Aug 2006 4:53 PM - 3 messages
Hi, I am a member of a small LAN of 10 computers, all of which run different flavours of Windows (98 XP, 2000, 2003) No internet connection. However, once in a while my PC, ( windows XP Pro- 256 Mb ram, 40Gb with 20GB ...
Leon Myerson -
7 Aug 2006 4:39 PM - 2 messages
I have a tape backup on my Windows server. Can I share it on the network so as to make a complete backup of a separate workstation as if the workstation had the drive? If so, please explain exactly how to do this. Thanks. -Leon ...
bigceetwo -
7 Aug 2006 4:30 PM - 3 messages
Hi, Does anyone know of links to/good article(s) that would guide me in building or rebuilding my home network? After searching all I found were small pieces here and there or stuff that was way above my head. ...
¦ce -
7 Aug 2006 4:09 PM - 2 messages
i cannot access [link] for the past 2weeks. I get the 'cannot find server' msg when i try to access it. On any other computer, i'm able to access the site. I never used to have this problem. I've included the site in ...
Logan Burt -
7 Aug 2006 3:43 PM - 2 messages
We have a number of workstations (most if not all are Windows XP Pro) that have AD computer accounts, are currently turned on with a user logged into AD, have file and print sharing enabled, but do not show up in the network ...
SS -
7 Aug 2006 3:39 PM - 6 messages
I have 2 computers (a laptop and a desktop) connected to my router at home. a. I connect my laptop to my corporate VPN. The laptop obtains a new IP address. b. The desktop is connected to my local router and has an IP address of ...
Romanyrye -
7 Aug 2006 2:55 PM - 2 messages
Hi, I am attempting to advertise clickbank products as an affiliate. However when my affiliate link is clicked on ,regardless of the product, a "page not found " message comes up. When I click on the merchants webpage there is no problem. ...
Romanyrye -
7 Aug 2006 2:46 PM - 6 messages
Hi All. I followed CHuck's advice and did test. Results. (using Yahoo accesses) Command window: - url OK ip address" Cannot find " Browser: url ok ip address.ok ...
brettsbignose -
7 Aug 2006 2:06 PM - 2 messages
Sirs: I work in the programming department and have just received 20 computers for quality assurance testing for some of our software. However, our network doesn't have enough IP addresses left(We are a class C network). Because of this, I want to put all of these systems ...
Ellen Hall -
7 Aug 2006 12:36 PM - 4 messages
Hello, After researching many sources, I realize that I lack the final piece of information to complete my goal. I have a Dell XPS wired directly to a D-Link G Wireless Router which brings in satellite internet. I have a Micron 98SE in the same room that I'd like ...
Pradeep -
7 Aug 2006 12:20 PM - 2 messages
I have running 4 system with WXPP within a single workgroup and there is no password or security system installed. All was running well but I installed Norton - 2006 recently in one system - aftter this installation I can't accesss this system from another system, while this sytem can access all ...
phil -
7 Aug 2006 12:19 PM - 4 messages
I know this is probably stupid but.. I finally got my home and laptop to talk to each other even though the computers don't show on the home computer (xp home) but do show on the laptop (xp pro). Took hours to get there but it does ...
Sooner Al [MVP] -
7 Aug 2006 11:02 AM - 2 messages
Ooppsss... I forgot the second part of your question... You need to setup port forwarding through your router for TCP Port 3389... See this page for help, etc... [link] ...
rastlin -
7 Aug 2006 7:41 AM - 2 messages
hello one and all i have a query...i have a wireless network setup and its all secure and stuff. i am able to share files and map network drives. none of my home pc's have a password and i leave the internal structure of the ...
John1943 -
7 Aug 2006 1:19 AM - 2 messages
I have adobe release 7, but recently I am unable to view pdf files directly from the web. To see them, I have to first save them on my machine. However, some files cannot be saved before reading. How can I fix this? ...
Liz -
7 Aug 2006 1:07 AM - 2 messages
I have no problem connecting to the internet on my laptop through a wireless connection but when I try to use any manual connection I get nowhere. I am able to "ping" the modem and the connection status reads "connected" but I ...
TheScott -
6 Aug 2006 11:48 PM - 3 messages
I have a desktop connected by ethernet cable to a Netgear RangeMax router (WPN824), and a laptop connected wirelessly to the same router. Both internet connections are working. Both can ping each other. I used the "network setup wizard" on each to try to set up a network and had ...
cfman -
6 Aug 2006 11:33 PM - 43 messages
Can I prevent some unrecognized network communications which are originated from my PC from being initiated? I am suspecting that some hidden malicious programs in my PC are making outgoing or outbound network communications. Can I prevent any such network traffic from happening? ...
jonesy889 -
6 Aug 2006 11:16 PM - 2 messages
Hello I currently have ICS set up between a desktop running XP Home (host) and laptop running XP Pro. They are networked wirelessly, and all is well. The desktop is set up as static IP 192.168.0.1, and the laptop to find an IP ...
Marc -
6 Aug 2006 10:20 PM - 8 messages
I am trying to set up a workgroup with 1 PC and 1 laptop. Both are running Windows XP SP2. I have them connected with a Linksys WRV54G router. They are currently both sharing a network connection from the router and that is ...
melc -
6 Aug 2006 8:50 PM - 2 messages
Using a Linksys BEFvp41 on both eds of tunnel--I have one tunnel set up
and working but it has a static ip at both ends--trying to set up a
tunnel when the remote end uses a dsl modem/router (cisco 2400)--I
can't get it to work--I can't see the remote linksys over the internet
even with remote managemnet and port 8080 enabled. I am lost!!!!
--
melc ...
Hoser -
6 Aug 2006 5:11 PM - 6 messages
Does anyone know a way to set up system so it can be easily be switched from a Domain configuration to Workgroup configuration? I'd like to be able to set up my notebook so I can switch between these two configurations to match ...
jaygreg -
6 Aug 2006 4:06 PM - 5 messages
When I execute the "command" then "ipconfig" commands at Start | Run, I see two ethernet adaptor report forms. 0 Ethernet adapter: IP Address.....: 0.0.0.0 Subset Mask.....: 0.0.0.0 Default Gateway..: (blank) 1 Ethernet adapter: ...
nadeem -
6 Aug 2006 2:35 PM - 8 messages
Hi, I've got 3 computers hooked up to my belkin router (laptop and one computer via wi-fi and the other computer with ethernet). It says on the box of my router that it has speeds of 54 Mb per second. Although ...
D D -
6 Aug 2006 11:12 AM - 2 messages
I AM USING A GLOBESPAN USB ADSL LAN MODEM (LOCAL AREA CONNECTION 2)ON AOL SILVER BROADBAND CONNECTION BUT I WANT TO USE MY PSP ONLINE VIA WIRELESS CONECTION WHAT DO I NEED TO DO TO ACTIVATE MY WIRELESS CONNECTION ?. CAN I ...
¦ce -
6 Aug 2006 10:14 AM - 3 messages
I'm finding it difficult to conect to [link] I've always been able to connect to it but suddenly, I've started receiving the 'Cannot find server' message. I tried connecting using a different internet connection and it worked so problem appears to be with my internet ...
|
|||||||||||||||||||||||