|
windows
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
file and printer sharing problemI have two wireless-enabled notebooks both running XP Home and both able to
access the Internet fine. I have followed all the instructions for file and printer sharing and run the Network troubleshooter, etc. I have also enabled NetBIOS over TCP/IP on both computers. However the computers cannot access each other's SharedDocs. In fact computer B's own SharedDocs do not even appear in My Network Places, whereas computer A's appear in its MNP. Computer B can ping successfully computer A, but not vice versa. It all seemed to work OK (although I didn't have much call to rely on shared files) until a couple of weeks ago when I tried to share a printer plugged into computer A from computer B. I would be most grateful for any further ideas - am I missing something? -- slowey On Fri, 10 Jun 2005 20:27:01 -0700, slowey <slo***@discussions.microsoft.com>
wrote: >I have two wireless-enabled notebooks both running XP Home and both able to With two wireless servers, and the MNP discrepancies, I'd bet you have a browser>access the Internet fine. I have followed all the instructions for file and >printer sharing and run the Network troubleshooter, etc. I have also enabled >NetBIOS over TCP/IP on both computers. However the computers cannot access >each other's SharedDocs. In fact computer B's own SharedDocs do not even >appear in My Network Places, whereas computer A's appear in its MNP. Computer >B can ping successfully computer A, but not vice versa. It all seemed to work >OK (although I didn't have much call to rely on shared files) until a couple >of weeks ago when I tried to share a printer plugged into computer A from >computer B. > >I would be most grateful for any further ideas - am I missing something? problem. <http://nitecruzr.blogspot.com/2005/05/browstat-utility-from-microsoft.html> The ping problem may indicate a firewall malfunction too. <http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html> -- Cheers, Chuck http://nitecruzr.blogspot.com/ Paranoia is not a problem - it's a normal response from experience. My email is AT DOT actual address pchuck sonic net. Thanks for the rapid reply, Chuck!
I have installed browstat on computer B and also temporarily disabled Norton Internet Security (which, surprise surprise I had installed on that computer about two weeks ago when the problems started). Computer B now has access to computer A's shareddocs, but not yet vice versa (restarting both computers did not help). I will set it up properly later, but at least this demonstrated the firewall was at least part of the problem. After running Browstat on computer B, there appear to be two problems compared to the example on your very helpful webpage about Browstat. Firstly, it "Could not connect to registry, error = 53" and was "Unable to determine build of browser master: 53". Secondly, it retrieved only one backup server from Computer A, namely Computer A. Not sure what this means I should do, and again would be most grateful for your sage advice, Chuck. many thanks -- Show quoteHide quoteslowey "Chuck" wrote: > On Fri, 10 Jun 2005 20:27:01 -0700, slowey <slo***@discussions.microsoft.com> > wrote: > > >I have two wireless-enabled notebooks both running XP Home and both able to > >access the Internet fine. I have followed all the instructions for file and > >printer sharing and run the Network troubleshooter, etc. I have also enabled > >NetBIOS over TCP/IP on both computers. However the computers cannot access > >each other's SharedDocs. In fact computer B's own SharedDocs do not even > >appear in My Network Places, whereas computer A's appear in its MNP. Computer > >B can ping successfully computer A, but not vice versa. It all seemed to work > >OK (although I didn't have much call to rely on shared files) until a couple > >of weeks ago when I tried to share a printer plugged into computer A from > >computer B. > > > >I would be most grateful for any further ideas - am I missing something? > > With two wireless servers, and the MNP discrepancies, I'd bet you have a browser > problem. > <http://nitecruzr.blogspot.com/2005/05/browstat-utility-from-microsoft.html> > > The ping problem may indicate a firewall malfunction too. > <http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html> > > -- > Cheers, > Chuck > http://nitecruzr.blogspot.com/ > Paranoia is not a problem - it's a normal response from experience. > My email is AT DOT > actual address pchuck sonic net. > On Sat, 11 Jun 2005 04:30:03 -0700, slowey <slo***@discussions.microsoft.com>
wrote: Show quoteHide quote >Thanks for the rapid reply, Chuck! An "error 53" is "name not found". That means that your computer can't resolve> >I have installed browstat on computer B and also temporarily disabled Norton >Internet Security (which, surprise surprise I had installed on that computer >about two weeks ago when the problems started). Computer B now has access to >computer A's shareddocs, but not yet vice versa (restarting both computers >did not help). I will set it up properly later, but at least this >demonstrated the firewall was at least part of the problem. > >After running Browstat on computer B, there appear to be two problems >compared to the example on your very helpful webpage about Browstat. Firstly, >it "Could not connect to registry, error = 53" and was "Unable to determine >build of browser master: 53". Secondly, it retrieved only one backup server >from Computer A, namely Computer A. > >Not sure what this means I should do, and again would be most grateful for >your sage advice, Chuck. > >many thanks the name of the browser server into an address. This is generally caused by a firewall blocking the name resolution process, or an invalid Node Type for name resolution. Run "ipconfig /all" on both computers, and see if there's a problem there. <http://nitecruzr.blogspot.com/2005/05/reading-ipconfig-and-diagnosing.html> Did you examine the browstat output per my instructions, and find no problems other than the "error 53" (which is simply a symptom there)? If no clues are offered by either "browstat status" or "ipconfig /all", then you'll have to either enable Norton Personal Firewall and properly configure it, or un install it totally, per detailed procedures (not just the un install wizard) provided by Symantec. NPF, like many Symantec products, is known for not reacting properly when deactivated, nor can it be reliably un installed using only its un install wizard. -- Cheers, Chuck http://nitecruzr.blogspot.com/ Paranoia is not a problem - it's a normal response from experience. My email is AT DOT actual address pchuck sonic net. Hi Chuck
Thanks for your help, but I'm still not any further advanced. I think I have now tried all the things on your very helpful site, including the browstat page and the network troubleshooting page. I have checked the Norton documentation and uninstalling the NIS from Add/Remove Programs is sufficient for a complete uninstall. 'A' now has NIS 2005 installed with the Personal Firewall running and the DNS server and 'B' listed in the trusted area. 'B' now just has Windows Firewall on. Both computers' firewalls have file sharing enabled in the relevant ways. The browstat output today looks fine for 'B' now but the error:53 problem is now with 'A'. Another potential problem is that ipconfig on 'B' revealed an unknown node type, and inserting the EnableProxy line in regedit did not rectify this. So, I am at a loss, and feel quite out of my depth here. I have pasted the ipconfig and browstat outputs from each computer below, and would be most grateful for any further advice you (or anyone else) are able to offer. Ipconfig ('A') Windows IP Configuration Host Name . . . . . . . . . . . . : OLDCOMPUTER Primary Dns Suffix . . . . . . . : Node Type . . .. . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoEthernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . .. . . . . . . . . . : LAN-Express IEEE 802.11 PCI Adapter Physical Address. . . . . . . . . : 00-02-8A-98-F1-B5 Dhcp Enabled. . . . . . . .. . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.100 Subnet Mask . . . . . . .. . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 Lease Obtained. . . . . . .. . . . : Sunday, 12 June 2005 11:23:30 AM Lease Expires . . . . . . . .. . . : Sunday, 19 June 2005 11:23:30 AM Browstat ('A') Status for domain MSHOME on transport \Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} Browsing is active on domain. Master browser name is: NEWCOMPUTER Could not connect to registry, error = 53 Unable to determine build of browser master: 53 \\\\NEWCOMPUTER . Version:05.01 Flags: 51203 NT POTENTIAL MASTER 1 backup servers retrieved from master NEWCOMPUTER \\NEWCOMPUTER Unable to retrieve server list from NEWCOMPUTER: 64 Ipconfig ('B') Windows IP Configuration Host Name . . . . . . . . . . . . : NEWCOMPUTER Primary Dns Suffix . . . . . . . : Node Type . . .. . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoEthernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . .. . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection Physical Address. . . . . . . . . : 00-0E-35-4C-55-42 Dhcp Enabled. . .. . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.101 Subnet Mask . . . . .. . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 Lease Obtained. . . . . . .. . . . : Sunday, 12 June 2005 11:22:50 AM Lease Expires . . . . . . . .. . . : Sunday, 19 June 2005 11:22:50 AM browstat ('B') Status for domain MSHOME on transport \Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} Browsing is active on domain. Master browser name is: NEWCOMPUTER Master browser is running build 2600 1 backup servers retrieved from master NEWCOMPUTER \\NEWCOMPUTER There are 2 servers in domain MSHOME on transport \Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} There are 1 domains in domain MSHOME on transport \Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} many thanks -- Show quoteHide quoteslowey "Chuck" wrote: > On Sat, 11 Jun 2005 04:30:03 -0700, slowey <slo***@discussions.microsoft.com> > wrote: > > >Thanks for the rapid reply, Chuck! > > > >I have installed browstat on computer B and also temporarily disabled Norton > >Internet Security (which, surprise surprise I had installed on that computer > >about two weeks ago when the problems started). Computer B now has access to > >computer A's shareddocs, but not yet vice versa (restarting both computers > >did not help). I will set it up properly later, but at least this > >demonstrated the firewall was at least part of the problem. > > > >After running Browstat on computer B, there appear to be two problems > >compared to the example on your very helpful webpage about Browstat. Firstly, > >it "Could not connect to registry, error = 53" and was "Unable to determine > >build of browser master: 53". Secondly, it retrieved only one backup server > >from Computer A, namely Computer A. > > > >Not sure what this means I should do, and again would be most grateful for > >your sage advice, Chuck. > > > >many thanks > > An "error 53" is "name not found". That means that your computer can't resolve > the name of the browser server into an address. This is generally caused by a > firewall blocking the name resolution process, or an invalid Node Type for name > resolution. > > Run "ipconfig /all" on both computers, and see if there's a problem there. > <http://nitecruzr.blogspot.com/2005/05/reading-ipconfig-and-diagnosing.html> > > Did you examine the browstat output per my instructions, and find no problems > other than the "error 53" (which is simply a symptom there)? > > If no clues are offered by either "browstat status" or "ipconfig /all", then > you'll have to either enable Norton Personal Firewall and properly configure it, > or un install it totally, per detailed procedures (not just the un install > wizard) provided by Symantec. NPF, like many Symantec products, is known for > not reacting properly when deactivated, nor can it be reliably un installed > using only its un install wizard. > > -- > Cheers, > Chuck > http://nitecruzr.blogspot.com/ > Paranoia is not a problem - it's a normal response from experience. > My email is AT DOT > actual address pchuck sonic net. > On Sat, 11 Jun 2005 19:46:02 -0700, slowey <slo***@discussions.microsoft.com>
wrote: Show quoteHide quote >Hi Chuck So from which computer did you un install NIS? Computer B looks clean now. Try> >Thanks for your help, but I'm still not any further advanced. I think I have >now tried all the things on your very helpful site, including the browstat >page and the network troubleshooting page. I have checked the Norton >documentation and uninstalling the NIS from Add/Remove Programs is sufficient >for a complete uninstall. 'A' now has NIS 2005 installed with the Personal >Firewall running and the DNS server and 'B' listed in the trusted area. 'B' >now just has Windows Firewall on. Both computers' firewalls have file sharing >enabled in the relevant ways. The browstat output today looks fine for 'B' >now but the error:53 problem is now with 'A'. Another potential problem is >that ipconfig on 'B' revealed an unknown node type, and inserting the >EnableProxy line in regedit did not rectify this. > >So, I am at a loss, and feel quite out of my depth here. > >I have pasted the ipconfig and browstat outputs from each computer below, >and would be most grateful for any further advice you (or anyone else) are >able to offer. doing the same to Computer A. Also check Computer A for a corrupt LSP / Winsock. <http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html> The Node Type Unknown, as far as I know, does not cause a problem, nor is it necessarily indicative of one. My computers have run fine for a couple years as Node Type Unknown; having read the article, I have considered fixing the situation per the article ""Ipconfig /All" Command Shows the Node Type as Unknown", but not with any amount of haste. -- Cheers, Chuck http://nitecruzr.blogspot.com/ Paranoia is not a problem - it's a normal response from experience. My email is AT DOT actual address pchuck sonic net. Hi Chuck
As suggested, I have uninstalled NIS from computer 'A' and checked for a corrupt Winsock using netdiag but it passed all the tests. I reinstalled it anyway using "netsh winsock reset" and restarted. Unfortunately I still have an error 53 in computer A's browstat output. I have redone browstat and pasted the output below. Any further ideas? :) 'A' Status for domain MSHOME on transport \Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} Browsing is active on domain. Master browser name is: NEWCOMPUTER Could not connect to registry, error = 53 Unable to determine build of browser master: 53 \\\\NEWCOMPUTER . Version:05.01 Flags: 51203 NT POTENTIAL MASTER 1 backup servers retrieved from master NEWCOMPUTER \\NEWCOMPUTER There are 2 servers in domain MSHOME on transport \Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} Unable to retrieve server list from NEWCOMPUTER: 64 'B' Status for domain MSHOME on transport \Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} Browsing is active on domain. Master browser name is: NEWCOMPUTER Master browser is running build 2600 1 backup servers retrieved from master NEWCOMPUTER \\NEWCOMPUTER There are 2 servers in domain MSHOME on transport \Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} There are 1 domains in domain MSHOME on transport \Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} many thanks! -- Show quoteHide quoteslowey "slowey" wrote: > Hi Chuck > > Thanks for your help, but I'm still not any further advanced. I think I have > now tried all the things on your very helpful site, including the browstat > page and the network troubleshooting page. I have checked the Norton > documentation and uninstalling the NIS from Add/Remove Programs is sufficient > for a complete uninstall. 'A' now has NIS 2005 installed with the Personal > Firewall running and the DNS server and 'B' listed in the trusted area. 'B' > now just has Windows Firewall on. Both computers' firewalls have file sharing > enabled in the relevant ways. The browstat output today looks fine for 'B' > now but the error:53 problem is now with 'A'. Another potential problem is > that ipconfig on 'B' revealed an unknown node type, and inserting the > EnableProxy line in regedit did not rectify this. > > So, I am at a loss, and feel quite out of my depth here. > > I have pasted the ipconfig and browstat outputs from each computer below, > and would be most grateful for any further advice you (or anyone else) are > able to offer. > > Ipconfig ('A') > > Windows IP Configuration Host Name . . . . . . . . . . . . : > OLDCOMPUTER Primary Dns Suffix . . . . . . . : Node Type . . > . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No > WINS Proxy Enabled. . . . . . . . : NoEthernet adapter Wireless Network > Connection: Connection-specific DNS Suffix . : Description . > . . . . . . . . . . : LAN-Express IEEE 802.11 PCI Adapter Physical > Address. . . . . . . . . : 00-02-8A-98-F1-B5 Dhcp Enabled. . . . . . . > . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP > Address. . . . . . . . . . . . : 192.168.0.100 Subnet Mask . . . . . . > . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : > 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS > Servers . . . . . . . . . . . : 192.168.0.1 Lease Obtained. . . . . . > . . . . : Sunday, 12 June 2005 11:23:30 AM Lease Expires . . . . . . . > . . . : Sunday, 19 June 2005 11:23:30 AM > > Browstat ('A') > > Status for domain MSHOME on transport > \Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} > Browsing is active on domain. > Master browser name is: NEWCOMPUTER > Could not connect to registry, error = 53 Unable to determine build > of browser master: 53 > \\\\NEWCOMPUTER . Version:05.01 Flags: 51203 NT POTENTIAL MASTER > 1 backup servers retrieved from master NEWCOMPUTER > \\NEWCOMPUTER > Unable to retrieve server list from NEWCOMPUTER: 64 > > Ipconfig ('B') > > Windows IP Configuration Host Name . . . . . . . . . . . . : > NEWCOMPUTER Primary Dns Suffix . . . . . . . : Node Type . . > . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No > WINS Proxy Enabled. . . . . . . . : NoEthernet adapter Wireless Network > Connection: Connection-specific DNS Suffix . : Description . > . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection > Physical Address. . . . . . . . . : 00-0E-35-4C-55-42 Dhcp Enabled. . > . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes > IP Address. . . . . . . . . . . . : 192.168.0.101 Subnet Mask . . . . > . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : > 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS > Servers . . . . . . . . . . . : 192.168.0.1 Lease Obtained. . . . . . > . . . . : Sunday, 12 June 2005 11:22:50 AM Lease Expires . . . . . . . > . . . : Sunday, 19 June 2005 11:22:50 AM > > browstat ('B') > > Status for domain MSHOME on transport > \Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} > Browsing is active on domain. > Master browser name is: NEWCOMPUTER > Master browser is running build 2600 > 1 backup servers retrieved from master NEWCOMPUTER > \\NEWCOMPUTER > There are 2 servers in domain MSHOME on transport > \Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} > There are 1 domains in domain MSHOME on transport > \Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} > > many thanks > -- > slowey > > > "Chuck" wrote: > > > On Sat, 11 Jun 2005 04:30:03 -0700, slowey <slo***@discussions.microsoft.com> > > wrote: > > > > >Thanks for the rapid reply, Chuck! > > > > > >I have installed browstat on computer B and also temporarily disabled Norton > > >Internet Security (which, surprise surprise I had installed on that computer > > >about two weeks ago when the problems started). Computer B now has access to > > >computer A's shareddocs, but not yet vice versa (restarting both computers > > >did not help). I will set it up properly later, but at least this > > >demonstrated the firewall was at least part of the problem. > > > > > >After running Browstat on computer B, there appear to be two problems > > >compared to the example on your very helpful webpage about Browstat. Firstly, > > >it "Could not connect to registry, error = 53" and was "Unable to determine > > >build of browser master: 53". Secondly, it retrieved only one backup server > > >from Computer A, namely Computer A. > > > > > >Not sure what this means I should do, and again would be most grateful for > > >your sage advice, Chuck. > > > > > >many thanks > > > > An "error 53" is "name not found". That means that your computer can't resolve > > the name of the browser server into an address. This is generally caused by a > > firewall blocking the name resolution process, or an invalid Node Type for name > > resolution. > > > > Run "ipconfig /all" on both computers, and see if there's a problem there. > > <http://nitecruzr.blogspot.com/2005/05/reading-ipconfig-and-diagnosing.html> > > > > Did you examine the browstat output per my instructions, and find no problems > > other than the "error 53" (which is simply a symptom there)? > > > > If no clues are offered by either "browstat status" or "ipconfig /all", then > > you'll have to either enable Norton Personal Firewall and properly configure it, > > or un install it totally, per detailed procedures (not just the un install > > wizard) provided by Symantec. NPF, like many Symantec products, is known for > > not reacting properly when deactivated, nor can it be reliably un installed > > using only its un install wizard. > > > > -- > > Cheers, > > Chuck > > http://nitecruzr.blogspot.com/ > > Paranoia is not a problem - it's a normal response from experience. > > My email is AT DOT > > actual address pchuck sonic net. > > On Sat, 11 Jun 2005 22:42:02 -0700, slowey <slo***@discussions.microsoft.com>
wrote: Show quoteHide quote >Hi Chuck When did you do the latest browstats - with NPF un installed from OldComputer?> >As suggested, I have uninstalled NIS from computer 'A' and checked for a >corrupt Winsock using netdiag but it passed all the tests. I reinstalled it >anyway using "netsh winsock reset" and restarted. Unfortunately I still have >an error 53 in computer A's browstat output. I have redone browstat and >pasted the output below. Any further ideas? :) > >'A' > >Status for domain MSHOME on transport >\Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} > Browsing is active on domain. > Master browser name is: NEWCOMPUTER >Could not connect to registry, error = 53 Unable to determine build >of browser master: 53 > \\\\NEWCOMPUTER . Version:05.01 Flags: 51203 NT POTENTIAL MASTER > 1 backup servers retrieved from master NEWCOMPUTER > \\NEWCOMPUTER > There are 2 servers in domain MSHOME on transport >\Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} > Unable to retrieve server list from NEWCOMPUTER: 64 > >'B' > >Status for domain MSHOME on transport >\Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} > Browsing is active on domain. > Master browser name is: NEWCOMPUTER > Master browser is running build 2600 > 1 backup servers retrieved from master NEWCOMPUTER > \\NEWCOMPUTER > There are 2 servers in domain MSHOME on transport >\Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} > There are 1 domains in domain MSHOME on transport >\Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} > >many thanks! Or after? Or before? Look at the difference: From earlier today: Browstat ('A') Status for domain MSHOME on transport \Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} Browsing is active on domain. Master browser name is: NEWCOMPUTER Could not connect to registry, error = 53 Unable to determine build of browser master: 53 \\\\NEWCOMPUTER . Version:05.01 Flags: 51203 NT POTENTIAL MASTER 1 backup servers retrieved from master NEWCOMPUTER \\NEWCOMPUTER Unable to retrieve server list from NEWCOMPUTER: 64 Most recently: 'A' Status for domain MSHOME on transport \Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} Browsing is active on domain. Master browser name is: NEWCOMPUTER Could not connect to registry, error = 53 Unable to determine build of browser master: 53 \\\\NEWCOMPUTER . Version:05.01 Flags: 51203 NT POTENTIAL MASTER 1 backup servers retrieved from master NEWCOMPUTER \\NEWCOMPUTER There are 2 servers in domain MSHOME on transport \Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} Unable to retrieve server list from NEWCOMPUTER: 64 It's seeing 2 servers now from OldComputer. Let's do CDiag. Take the following code (everything inside the "#####"). (Please verify computer names and ip addresses). 1. Open Notepad. Ensure that Format - Word Wrap is not checked. Highlight then Copy the code (Ctrl-C), precisely as it is presented, and Paste (Ctrl-V) into Notepad. Verify, and correct, names and addresses if necessary. 2. Save the Notepad file as "cdiag.cmd", as type "All Files", into the root folder "C:\". 3. Run it by Start - Run - "c:\cdiag". 4. Wait patiently. 5. When Notepad opens up displaying c:\cdiag.txt, first check Format and ensure that Word Wrap is NOT checked! Then, copy the entire contents (Ctrl-A Ctrl-C) and paste (Ctrl-V) into your next post. Do this from both computers, please, with both computers powered up and online. ##### Start CDiag Base Code @echo off set FullTarget1=OLDCOMPUTER 192.168.0.100 set FullTarget2=NEWCOMPUTER 192.168.0.101 set FullTarget3= set FullTarget4= set FullTargets=%FullTarget1% %FullTarget2% %FullTarget3% %FullTarget4% set FullTargets=%FullTargets% 127.0.0.1 set PingTargets=www.yahoo.com 66.94.230.32 192.168.0.1 Set Version=V1.32 @echo CDiagnosis %Version% >c:\cdiag.txt @echo Start diagnosis for %computername% >>c:\cdiag.txt @echo. >>c:\cdiag.txt @echo AdHoc Browser View >>c:\cdiag.txt @echo. >>c:\cdiag.txt net view >>c:\cdiag.txt @echo. >>c:\cdiag.txt @echo Full Targets %FullTargets% >>c:\cdiag.txt for %%a in (%FullTargets%) do ( @echo. >>c:\cdiag.txt @echo Target %%a >>c:\cdiag.txt @echo. >>c:\cdiag.txt @echo "%computername% ping %%a" >>c:\cdiag.txt @echo. >>c:\cdiag.txt ping %%a >>c:\cdiag.txt @echo. >>c:\cdiag.txt @echo "%computername% net view %%a" >>c:\cdiag.txt @echo. >>c:\cdiag.txt net view %%a >>c:\cdiag.txt ) @echo. >>c:\cdiag.txt @echo Ping Targets %PingTargets% >>c:\cdiag.txt for %%a in (%PingTargets%) do ( @echo. >>c:\cdiag.txt @echo Target %%a >>c:\cdiag.txt @echo. >>c:\cdiag.txt @echo "%computername% ping %%a" >>c:\cdiag.txt @echo. >>c:\cdiag.txt ping %%a >>c:\cdiag.txt ) @echo. >>c:\cdiag.txt @echo End diagnosis for %computername% >>c:\cdiag.txt notepad c:\cdiag.txt :EOF ##### End CDiag Base Code-- Cheers, Chuck http://nitecruzr.blogspot.com/ Paranoia is not a problem - it's a normal response from experience. My email is AT DOT actual address pchuck sonic net. This seems like some serious problem I have here. Have gratefully and humbly
done as you say. Most recent output from browstat was taken just before I posted, after uninstalling NIS from A (oldcomputer). Here is the CDiag output: CDiagnosis V1.32 Start diagnosis for OLDCOMPUTER AdHoc Browser View Server Name Remark ------------------------------------------------------------------------------- \\NEWCOMPUTER \\OLDCOMPUTER Old Computer The command completed successfully. Full Targets OLDCOMPUTER 192.168.0.100 NEWCOMPUTER 192.168.0.101 127.0.0.1 Target OLDCOMPUTER "OLDCOMPUTER ping OLDCOMPUTER" Pinging OLDCOMPUTER [192.168.0.100] with 32 bytes of data: Reply from 192.168.0.100: bytes=32 time<1ms TTL=128 Reply from 192.168.0.100: bytes=32 time<1ms TTL=128 Reply from 192.168.0.100: bytes=32 time<1ms TTL=128 Reply from 192.168.0.100: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.0.100: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms "OLDCOMPUTER net view OLDCOMPUTER" Shared resources at OLDCOMPUTER Old Computer Share name Type Used as Comment ------------------------------------------------------------------------------- Printer Print Samsung SF-5100P Printer2 Print Canon MP730 Printer SharedDocs Disk The command completed successfully. Target 192.168.0.100 "OLDCOMPUTER ping 192.168.0.100" Pinging 192.168.0.100 with 32 bytes of data: Reply from 192.168.0.100: bytes=32 time<1ms TTL=128 Reply from 192.168.0.100: bytes=32 time<1ms TTL=128 Reply from 192.168.0.100: bytes=32 time<1ms TTL=128 Reply from 192.168.0.100: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.0.100: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms "OLDCOMPUTER net view 192.168.0.100" Shared resources at 192.168.0.100 Old Computer Share name Type Used as Comment ------------------------------------------------------------------------------- Printer Print Samsung SF-5100P Printer2 Print Canon MP730 Printer SharedDocs Disk The command completed successfully. Target NEWCOMPUTER "OLDCOMPUTER ping NEWCOMPUTER" Pinging NEWCOMPUTER [192.168.0.101] with 32 bytes of data: Reply from 192.168.0.101: bytes=32 time=3ms TTL=128 Reply from 192.168.0.101: bytes=32 time=4ms TTL=128 Reply from 192.168.0.101: bytes=32 time=4ms TTL=128 Reply from 192.168.0.101: bytes=32 time=3ms TTL=128 Ping statistics for 192.168.0.101: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 3ms, Maximum = 4ms, Average = 3ms "OLDCOMPUTER net view NEWCOMPUTER" Shared resources at NEWCOMPUTER Share name Type Used as Comment ------------------------------------------------------------------------------- Printer Print Canon MP730 Printer The command completed successfully. Target 192.168.0.101 "OLDCOMPUTER ping 192.168.0.101" Pinging 192.168.0.101 with 32 bytes of data: Reply from 192.168.0.101: bytes=32 time=3ms TTL=128 Reply from 192.168.0.101: bytes=32 time=3ms TTL=128 Reply from 192.168.0.101: bytes=32 time=4ms TTL=128 Reply from 192.168.0.101: bytes=32 time=4ms TTL=128 Ping statistics for 192.168.0.101: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 3ms, Maximum = 4ms, Average = 3ms "OLDCOMPUTER net view 192.168.0.101" Shared resources at 192.168.0.101 Share name Type Used as Comment ------------------------------------------------------------------------------- Printer Print Canon MP730 Printer The command completed successfully. Target 127.0.0.1 "OLDCOMPUTER ping 127.0.0.1" Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms "OLDCOMPUTER net view 127.0.0.1" Shared resources at 127.0.0.1 Old Computer Share name Type Used as Comment ------------------------------------------------------------------------------- Printer Print Samsung SF-5100P Printer2 Print Canon MP730 Printer SharedDocs Disk The command completed successfully. Ping Targets www.yahoo.com 66.94.230.32 192.168.0.1 Target www.yahoo.com "OLDCOMPUTER ping www.yahoo.com" Pinging www.yahoo.akadns.net [66.94.230.45] with 32 bytes of data: Reply from 66.94.230.45: bytes=32 time=180ms TTL=49 Reply from 66.94.230.45: bytes=32 time=182ms TTL=49 Reply from 66.94.230.45: bytes=32 time=178ms TTL=49 Reply from 66.94.230.45: bytes=32 time=182ms TTL=49 Ping statistics for 66.94.230.45: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 178ms, Maximum = 182ms, Average = 180ms Target 66.94.230.32 "OLDCOMPUTER ping 66.94.230.32" Pinging 66.94.230.32 with 32 bytes of data: Reply from 66.94.230.32: bytes=32 time=183ms TTL=49 Reply from 66.94.230.32: bytes=32 time=179ms TTL=49 Reply from 66.94.230.32: bytes=32 time=181ms TTL=49 Reply from 66.94.230.32: bytes=32 time=179ms TTL=49 Ping statistics for 66.94.230.32: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 179ms, Maximum = 183ms, Average = 180ms Target 192.168.0.1 "OLDCOMPUTER ping 192.168.0.1" Pinging 192.168.0.1 with 32 bytes of data: Reply from 192.168.0.1: bytes=32 time=2ms TTL=127 Reply from 192.168.0.1: bytes=32 time=2ms TTL=127 Reply from 192.168.0.1: bytes=32 time=2ms TTL=127 Reply from 192.168.0.1: bytes=32 time=2ms TTL=127 Ping statistics for 192.168.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 2ms, Maximum = 2ms, Average = 2ms End diagnosis for OLDCOMPUTER CDiagnosis V1.32 Start diagnosis for NEWCOMPUTER AdHoc Browser View Server Name Remark ------------------------------------------------------------------------------- \\NEWCOMPUTER \\OLDCOMPUTER Old Computer The command completed successfully. Full Targets OLDCOMPUTER 192.168.0.100 NEWCOMPUTER 192.168.0.101 127.0.0.1 Target OLDCOMPUTER "NEWCOMPUTER ping OLDCOMPUTER" Pinging OLDCOMPUTER [192.168.0.100] with 32 bytes of data: Reply from 192.168.0.100: bytes=32 time=3ms TTL=128 Reply from 192.168.0.100: bytes=32 time=4ms TTL=128 Reply from 192.168.0.100: bytes=32 time=4ms TTL=128 Reply from 192.168.0.100: bytes=32 time=4ms TTL=128 Ping statistics for 192.168.0.100: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 3ms, Maximum = 4ms, Average = 3ms "NEWCOMPUTER net view OLDCOMPUTER" Shared resources at OLDCOMPUTER Old Computer Share name Type Used as Comment ------------------------------------------------------------------------------- Printer Print Samsung SF-5100P Printer2 Print Canon MP730 Printer SharedDocs Disk (UNC) The command completed successfully. Target 192.168.0.100 "NEWCOMPUTER ping 192.168.0.100" Pinging 192.168.0.100 with 32 bytes of data: Reply from 192.168.0.100: bytes=32 time=4ms TTL=128 Reply from 192.168.0.100: bytes=32 time=3ms TTL=128 Reply from 192.168.0.100: bytes=32 time=4ms TTL=128 Reply from 192.168.0.100: bytes=32 time=6ms TTL=128 Ping statistics for 192.168.0.100: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 3ms, Maximum = 6ms, Average = 4ms "NEWCOMPUTER net view 192.168.0.100" Shared resources at 192.168.0.100 Old Computer Share name Type Used as Comment ------------------------------------------------------------------------------- Printer Print Samsung SF-5100P Printer2 Print Canon MP730 Printer SharedDocs Disk The command completed successfully. Target NEWCOMPUTER "NEWCOMPUTER ping NEWCOMPUTER" Pinging NEWCOMPUTER [192.168.0.101] with 32 bytes of data: Reply from 192.168.0.101: bytes=32 time<1ms TTL=128 Reply from 192.168.0.101: bytes=32 time<1ms TTL=128 Reply from 192.168.0.101: bytes=32 time<1ms TTL=128 Reply from 192.168.0.101: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.0.101: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms "NEWCOMPUTER net view NEWCOMPUTER" Shared resources at NEWCOMPUTER Share name Type Used as Comment ------------------------------------------------------------------------------- Printer Print Canon MP730 Printer The command completed successfully. Target 192.168.0.101 "NEWCOMPUTER ping 192.168.0.101" Pinging 192.168.0.101 with 32 bytes of data: Reply from 192.168.0.101: bytes=32 time<1ms TTL=128 Reply from 192.168.0.101: bytes=32 time<1ms TTL=128 Reply from 192.168.0.101: bytes=32 time<1ms TTL=128 Reply from 192.168.0.101: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.0.101: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms "NEWCOMPUTER net view 192.168.0.101" Shared resources at 192.168.0.101 Share name Type Used as Comment ------------------------------------------------------------------------------- Printer Print Canon MP730 Printer The command completed successfully. Target 127.0.0.1 "NEWCOMPUTER ping 127.0.0.1" Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms "NEWCOMPUTER net view 127.0.0.1" Shared resources at 127.0.0.1 Share name Type Used as Comment ------------------------------------------------------------------------------- Printer Print Canon MP730 Printer The command completed successfully. Ping Targets www.yahoo.com 66.94.230.32 192.168.0.1 Target www.yahoo.com "NEWCOMPUTER ping www.yahoo.com" Pinging www.yahoo.akadns.net [66.94.230.45] with 32 bytes of data: Reply from 66.94.230.45: bytes=32 time=184ms TTL=49 Reply from 66.94.230.45: bytes=32 time=189ms TTL=49 Reply from 66.94.230.45: bytes=32 time=177ms TTL=49 Reply from 66.94.230.45: bytes=32 time=199ms TTL=49 Ping statistics for 66.94.230.45: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 177ms, Maximum = 199ms, Average = 187ms Target 66.94.230.32 "NEWCOMPUTER ping 66.94.230.32" Pinging 66.94.230.32 with 32 bytes of data: Reply from 66.94.230.32: bytes=32 time=201ms TTL=49 Reply from 66.94.230.32: bytes=32 time=188ms TTL=49 Reply from 66.94.230.32: bytes=32 time=178ms TTL=49 Reply from 66.94.230.32: bytes=32 time=181ms TTL=49 Ping statistics for 66.94.230.32: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 178ms, Maximum = 201ms, Average = 187ms Target 192.168.0.1 "NEWCOMPUTER ping 192.168.0.1" Pinging 192.168.0.1 with 32 bytes of data: Reply from 192.168.0.1: bytes=32 time=1ms TTL=127 Reply from 192.168.0.1: bytes=32 time=1ms TTL=127 Reply from 192.168.0.1: bytes=32 time=1ms TTL=127 Reply from 192.168.0.1: bytes=32 time=1ms TTL=127 Ping statistics for 192.168.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms End diagnosis for NEWCOMPUTER -- Show quoteHide quoteslowey "Chuck" wrote: > On Sat, 11 Jun 2005 22:42:02 -0700, slowey <slo***@discussions.microsoft.com> > wrote: > > >Hi Chuck > > > >As suggested, I have uninstalled NIS from computer 'A' and checked for a > >corrupt Winsock using netdiag but it passed all the tests. I reinstalled it > >anyway using "netsh winsock reset" and restarted. Unfortunately I still have > >an error 53 in computer A's browstat output. I have redone browstat and > >pasted the output below. Any further ideas? :) > > > >'A' > > > >Status for domain MSHOME on transport > >\Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} > > Browsing is active on domain. > > Master browser name is: NEWCOMPUTER > >Could not connect to registry, error = 53 Unable to determine build > >of browser master: 53 > > \\\\NEWCOMPUTER . Version:05.01 Flags: 51203 NT POTENTIAL MASTER > > 1 backup servers retrieved from master NEWCOMPUTER > > \\NEWCOMPUTER > > There are 2 servers in domain MSHOME on transport > >\Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} > > Unable to retrieve server list from NEWCOMPUTER: 64 > > > >'B' > > > >Status for domain MSHOME on transport > >\Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} > > Browsing is active on domain. > > Master browser name is: NEWCOMPUTER > > Master browser is running build 2600 > > 1 backup servers retrieved from master NEWCOMPUTER > > \\NEWCOMPUTER > > There are 2 servers in domain MSHOME on transport > >\Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} > > There are 1 domains in domain MSHOME on transport > >\Device\NetBT_Tcpip_{86F61F2B-CC7B-4673-A416-A97C043AE6D4} > > > >many thanks! > > When did you do the latest browstats - with NPF un installed from OldComputer? > Or after? Or before? > > Look at the difference: > > From earlier today: > Browstat ('A') > > Status for domain MSHOME on transport > \Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} > Browsing is active on domain. > Master browser name is: NEWCOMPUTER > Could not connect to registry, error = 53 Unable to determine build > of browser master: 53 > \\\\NEWCOMPUTER . Version:05.01 Flags: 51203 NT POTENTIAL MASTER > 1 backup servers retrieved from master NEWCOMPUTER > \\NEWCOMPUTER > Unable to retrieve server list from NEWCOMPUTER: 64 > > Most recently: > 'A' > > Status for domain MSHOME on transport > \Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} > Browsing is active on domain. > Master browser name is: NEWCOMPUTER > Could not connect to registry, error = 53 Unable to determine build > of browser master: 53 > \\\\NEWCOMPUTER . Version:05.01 Flags: 51203 NT POTENTIAL MASTER > 1 backup servers retrieved from master NEWCOMPUTER > \\NEWCOMPUTER > There are 2 servers in domain MSHOME on transport > \Device\NetBT_Tcpip_{3FCA99BF-F27B-451F-B6E8-27B63C23199A} > Unable to retrieve server list from NEWCOMPUTER: 64 > > It's seeing 2 servers now from OldComputer. > > Let's do CDiag. > > Take the following code (everything inside the "#####"). (Please verify computer > names and ip addresses). > > > 1. Open Notepad. Ensure that Format - Word Wrap is not checked. Highlight > then Copy the code (Ctrl-C), precisely as it is presented, and Paste (Ctrl-V) > into Notepad. Verify, and correct, names and addresses if necessary. > 2. Save the Notepad file as "cdiag.cmd", as type "All Files", into the root > folder "C:\". > 3. Run it by Start - Run - "c:\cdiag". > 4. Wait patiently. > 5. When Notepad opens up displaying c:\cdiag.txt, first check Format and > ensure that Word Wrap is NOT checked! Then, copy the entire contents (Ctrl-A > Ctrl-C) and paste (Ctrl-V) into your next post. > > > Do this from both computers, please, with both computers powered up and online. > > > ##### Start CDiag Base Code > > @echo off > set FullTarget1=OLDCOMPUTER 192.168.0.100 > set FullTarget2=NEWCOMPUTER 192.168.0.101 > set FullTarget3= > set FullTarget4= > set FullTargets=%FullTarget1% %FullTarget2% %FullTarget3% %FullTarget4% > set FullTargets=%FullTargets% 127.0.0.1 > set PingTargets=www.yahoo.com 66.94.230.32 192.168.0.1 > Set Version=V1.32 > @echo CDiagnosis %Version% >c:\cdiag.txt > @echo Start diagnosis for %computername% >>c:\cdiag.txt > @echo. >>c:\cdiag.txt > @echo AdHoc Browser View >>c:\cdiag.txt > @echo. >>c:\cdiag.txt > net view >>c:\cdiag.txt > @echo. >>c:\cdiag.txt > @echo Full Targets %FullTargets% >>c:\cdiag.txt > for %%a in (%FullTargets%) do ( > @echo. >>c:\cdiag.txt > @echo Target %%a >>c:\cdiag.txt > @echo. >>c:\cdiag.txt > @echo "%computername% ping %%a" >>c:\cdiag.txt > @echo. >>c:\cdiag.txt > ping %%a >>c:\cdiag.txt > @echo. >>c:\cdiag.txt > @echo "%computername% net view %%a" >>c:\cdiag.txt > @echo. >>c:\cdiag.txt > net view %%a >>c:\cdiag.txt > ) > @echo. >>c:\cdiag.txt > @echo Ping Targets %PingTargets% >>c:\cdiag.txt > for %%a in (%PingTargets%) do ( > @echo. >>c:\cdiag.txt > @echo Target %%a >>c:\cdiag.txt > @echo. >>c:\cdiag.txt > @echo "%computername% ping %%a" >>c:\cdiag.txt > @echo. >>c:\cdiag.txt > ping %%a >>c:\cdiag.txt > ) > @echo. >>c:\cdiag.txt > @echo End diagnosis for %computername% >>c:\cdiag.txt > notepad c:\cdiag.txt > :EOF > > ##### End CDiag Base Code > > -- > Cheers, > Chuck > http://nitecruzr.blogspot.com/ > Paranoia is not a problem - it's a normal response from experience. > My email is AT DOT > actual address pchuck sonic net. > On Sat, 11 Jun 2005 23:40:01 -0700, slowey <slo***@discussions.microsoft.com>
wrote: >This seems like some serious problem I have here. Have gratefully and humbly So what problem exactly are you still seeing? I don't see any problems with>done as you say. Most recent output from browstat was taken just before I >posted, after uninstalling NIS from A (oldcomputer). Here is the CDiag output: either computer pinging the other, nor with either computer seeing each other in general? Are we maybe looking at a share problem? What edition (Home or Pro) and file sharing (simple or advanced) is each computer running? <http://nitecruzr.blogspot.com/2005/06/file-sharing-under-windows-xp.html> -- Cheers, Chuck http://nitecruzr.blogspot.com/ Paranoia is not a problem - it's a normal response from experience. My email is AT DOT actual address pchuck sonic net. Thanks Chuck. I think the problem is now solved. I ran the Network
configuration wizard on both computers and file and printer sharing worked fine. It's great when things work as they are supposed to! Then I installed NIS on both computers and by using the networking wizard file sharing still worked! Thanks very much for all your help Chuck. To sum up it seems that the root of my problems was that when I got my second computer a while back I should have uninstalled NIS and set up wireless networking properly before reinstalling NIS. Not sure that we discovered any other problems in all that diagnostics. Again, thanks! -- Show quoteHide quoteslowey "Chuck" wrote: > On Sat, 11 Jun 2005 23:40:01 -0700, slowey <slo***@discussions.microsoft.com> > wrote: > > >This seems like some serious problem I have here. Have gratefully and humbly > >done as you say. Most recent output from browstat was taken just before I > >posted, after uninstalling NIS from A (oldcomputer). Here is the CDiag output: > > So what problem exactly are you still seeing? I don't see any problems with > either computer pinging the other, nor with either computer seeing each other in > general? Are we maybe looking at a share problem? > > What edition (Home or Pro) and file sharing (simple or advanced) is each > computer running? > <http://nitecruzr.blogspot.com/2005/06/file-sharing-under-windows-xp.html> > > -- > Cheers, > Chuck > http://nitecruzr.blogspot.com/ > Paranoia is not a problem - it's a normal response from experience. > My email is AT DOT > actual address pchuck sonic net. >
Ready to use portable hd instead of networking headache!
Problems adding Media Center computer to home network with 98s. No connection to router web access page VPN DNS quit working Question about sharing on network with two users same machine....HELP Help! Problem with network Cannot ping myself Can a networked CD drive look like a CD drive from another computer? Cannot connect to IE ICS and Networking |
|||||||||||||||||||||||