|
windows
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
Wireless home network share problemto a router and then to a modem sharing an internet connection. The laptop is connected via 802.11g wireless and the PC is wired to the router. Both computers are running XP Home SP2 and can access and browse the internet ok. I set up file and printer sharing and installed the NWLink NetBIOS protocol on both computers. I also configured zone alarm (on both computers) so each IP address is accepted in the trusted zone. I can ping each computer and can also see/browse each computer from the other. My problem is that when I surf the internet from the PC (wired) or try to access the laptop's shared folders it disconnects me from my wireless network. I have to repair the connection to re-connect. I switched to wired for both computers and everything is fine, but when I go back to wireless (laptop) it keeps disconnecting me from the wireless network! Any help would be appreciated. I am using static IP's for both computers and also using WPA and MAC address filtering for my wireless connection. Thanks in advance On Tue, 22 Aug 2006 16:49:01 -0700, scotcan <scot***@discussions.microsoft.com>
wrote: Show quoteHide quote >I have a home network consisting of one laptop and a PC, both are connected If you have WPA working, you are adequately protected against any WiFi threats.>to a router and then to a modem sharing an internet connection. The laptop is >connected via 802.11g wireless and the PC is wired to the router. Both >computers are running XP Home SP2 and can access and browse the internet ok. > >I set up file and printer sharing and installed the NWLink NetBIOS protocol >on both computers. I also configured zone alarm (on both computers) so each >IP address is accepted in the trusted zone. I can ping each computer and can >also see/browse each computer from the other. > >My problem is that when I surf the internet from the PC (wired) or try to >access the laptop's shared folders it disconnects me from my wireless >network. I have to repair the connection to re-connect. I switched to wired >for both computers and everything is fine, but when I go back to wireless >(laptop) it keeps disconnecting me from the wireless network! > >Any help would be appreciated. I am using static IP's for both computers and >also using WPA and MAC address filtering for my wireless connection. > >Thanks in advance MAC address filtering does nothing to enhance your security, and it can provide needless complexity and complications. <http://nitecruzr.blogspot.com/2005/05/setting-up-wifi-lan-please-protect.html> http://nitecruzr.blogspot.com/2005/05/setting-up-wifi-lan-please-protect.html Next, why do you need IPX/SPX (aka "NWLink IPX/SPX/NetBIOS Compatible Transport Protocol")? If you have Zone Alarm working properly, IPX/SPX bypasses that. IPX/SPX is useful in one specific case. <http://nitecruzr.blogspot.com/2005/05/one-unique-case-where-ipxspx-may-help.html> http://nitecruzr.blogspot.com/2005/05/one-unique-case-where-ipxspx-may-help.html Now, I doubt that either MAC address filtering or IPX/SPX are causing the problem which you're describing, but they both complicate matters, and neither make you more secure. If you're behind a router, and have WPA, you don't need either. I'll ask you to ping the router, both when "connected" and when "disconnected", and see exactly what return you get. <http://nitecruzr.blogspot.com/2005/12/ping-command.html> http://nitecruzr.blogspot.com/2005/12/ping-command.html Remember that ping is an IP command; if you have IPX/SPX, you may have file sharing but ping won't necessarily work. Note the differences between using IP (standard) and IPX/SPX (NOT standard). <http://nitecruzr.blogspot.com/2005/07/windows-networking-and-alternate.html> http://nitecruzr.blogspot.com/2005/07/windows-networking-and-alternate.html Finally, look at "browstat status" and "ipconfig /all", from each computer, so we can diagnose the problem, both when you're "connected" and when "disconnected". Read this article, and linked articles, and follow instructions precisely (download browstat!): <http://nitecruzr.blogspot.com/2005/05/troubleshooting-network-neighborhood.html#AskingForHelp> http://nitecruzr.blogspot.com/2005/05/troubleshooting-network-neighborhood.html#AskingForHelp -- Cheers, Chuck, MS-MVP [Windows - Networking] http://nitecruzr.blogspot.com/ Paranoia is not a problem, when it's a normal response from experience. My email is AT DOT actual address pchuck mvps org. On Tue, 22 Aug 2006 17:37:27 -0700, Chuck <n***@example.net> wrote:
Show quoteHide quote >On Tue, 22 Aug 2006 16:49:01 -0700, scotcan <scot***@discussions.microsoft.com> Is NetBT consistently set? In your case, I'd recommend that you Enable it for>wrote: > >>I have a home network consisting of one laptop and a PC, both are connected >>to a router and then to a modem sharing an internet connection. The laptop is >>connected via 802.11g wireless and the PC is wired to the router. Both >>computers are running XP Home SP2 and can access and browse the internet ok. >> >>I set up file and printer sharing and installed the NWLink NetBIOS protocol >>on both computers. I also configured zone alarm (on both computers) so each >>IP address is accepted in the trusted zone. I can ping each computer and can >>also see/browse each computer from the other. >> >>My problem is that when I surf the internet from the PC (wired) or try to >>access the laptop's shared folders it disconnects me from my wireless >>network. I have to repair the connection to re-connect. I switched to wired >>for both computers and everything is fine, but when I go back to wireless >>(laptop) it keeps disconnecting me from the wireless network! >> >>Any help would be appreciated. I am using static IP's for both computers and >>also using WPA and MAC address filtering for my wireless connection. >> >>Thanks in advance > >If you have WPA working, you are adequately protected against any WiFi threats. >MAC address filtering does nothing to enhance your security, and it can provide >needless complexity and complications. ><http://nitecruzr.blogspot.com/2005/05/setting-up-wifi-lan-please-protect.html> >http://nitecruzr.blogspot.com/2005/05/setting-up-wifi-lan-please-protect.html > >Next, why do you need IPX/SPX (aka "NWLink IPX/SPX/NetBIOS Compatible Transport >Protocol")? If you have Zone Alarm working properly, IPX/SPX bypasses that. >IPX/SPX is useful in one specific case. ><http://nitecruzr.blogspot.com/2005/05/one-unique-case-where-ipxspx-may-help.html> >http://nitecruzr.blogspot.com/2005/05/one-unique-case-where-ipxspx-may-help.html > >Now, I doubt that either MAC address filtering or IPX/SPX are causing the >problem which you're describing, but they both complicate matters, and neither >make you more secure. If you're behind a router, and have WPA, you don't need >either. > >I'll ask you to ping the router, both when "connected" and when "disconnected", >and see exactly what return you get. ><http://nitecruzr.blogspot.com/2005/12/ping-command.html> >http://nitecruzr.blogspot.com/2005/12/ping-command.html > >Remember that ping is an IP command; if you have IPX/SPX, you may have file >sharing but ping won't necessarily work. Note the differences between using IP >(standard) and IPX/SPX (NOT standard). ><http://nitecruzr.blogspot.com/2005/07/windows-networking-and-alternate.html> >http://nitecruzr.blogspot.com/2005/07/windows-networking-and-alternate.html > >Finally, look at "browstat status" and "ipconfig /all", from each computer, so >we can diagnose the problem, both when you're "connected" and when >"disconnected". Read this article, and linked articles, and follow instructions >precisely (download browstat!): ><http://nitecruzr.blogspot.com/2005/05/troubleshooting-network-neighborhood.html#AskingForHelp> >http://nitecruzr.blogspot.com/2005/05/troubleshooting-network-neighborhood.html#AskingForHelp each network connection. <http://nitecruzr.blogspot.com/2006/04/netbios-over-tcpip.html> http://nitecruzr.blogspot.com/2006/04/netbios-over-tcpip.html Then check for personal firewalls, incorrectly set. <http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html> http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html -- Cheers, Chuck, MS-MVP [Windows - Networking] http://nitecruzr.blogspot.com/ Paranoia is not a problem, when it's a normal response from experience. My email is AT DOT actual address pchuck mvps org. Thanks for replying Chuck.
I disabled MAC address filtering and uninstalled the IPX/SPX protocol and now I don't get disconnected using wireless. I do however have another problem now! I can ping both computers from each other and can access the PC's shared files from the laptop but not vice versa! The error I am getting now is: \\MARK\SharedDocs is not accessible. You might not have the permission to use this network resource. Contact the administrator of this server to find out if you have access permissions The network path was not found Both computers are running Win XP version 2002 with SP2. The PC has IE v7 (beta) and the laptop has IE v6. I did what you asked me to do and pinged the router from each computer and also ran ipconfig and browstat. Here are the details: Laptop (wireless) & PC (wired) ping router connected Pinging 192.168.65.254 with 32 bytes of data: Reply from 192.168.65.254: bytes=32 time=1ms TTL=255 Reply from 192.168.65.254: bytes=32 time=1ms TTL=255 Reply from 192.168.65.254: bytes=32 time=2ms TTL=255 Reply from 192.168.65.254: bytes=32 time=91ms TTL=255 Ping statistics for 192.168.65.254: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 91ms, Average = 23ms Laptop (wireless) & PC (wired) ping router not connected Pinging 192.168.65.254 with 32 bytes of data: Destination host unreachable. Destination host unreachable. Destination host unreachable. Destination host unreachable. Ping statistics for 192.168.65.254: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), ipconfig /all (laptop connected) Windows IP Configuration Host Name . . . . . . . . . . . . : Mark Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Mixed IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet NIC Physical Address. . . . . . . . . : 00-0A-E4-45-5D-10 Ethernet adapter Wireless Network Connection 10: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : IEEE 802.11g Wireless Cardbus/PCI Adapter Physical Address. . . . . . . . . : 00-40-F4-DD-9C-B2 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.65.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.65.254 DNS Servers . . . . . . . . . . . : 206.191.0.140 106.191.0.210 ipconfig /all (laptop disconnected) Windows IP Configuration Host Name . . . . . . . . . . . . : Mark Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Mixed IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet NIC Physical Address. . . . . . . . . : 00-0A-E4-45-5D-10 Ethernet adapter Wireless Network Connection 10: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : IEEE 802.11g Wireless Cardbus/PCI Adapter Physical Address. . . . . . . . . : 00-40-F4-DD-9C-B2 ipconfig (PC connected) Windows IP Configuration Host Name . . . . . . . . . . . . : Tina Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/100 M Network Connection Physical Address. . . . . . . . . : 00-07-E9-DE-88-41 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.65.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.65.254 DNS Servers . . . . . . . . . . . : 206.191.0.140 206.191.0.210 ipconfig (PC disconnected) Windows IP Configuration Host Name . . . . . . . . . . . . : Tina Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) PRO/100 M Network Connection Physical Address. . . . . . . . . : 00-07-E9-DE-88-41 browstat (laptop) Status for domain MALIBOU on transport \Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} Browsing is active on domain. Master browser name is: TINA Could not connect to registry, error = 53 Unable to determine build of browser master: 53 \\\\TINA . Version:05.01 Flags: 51203 NT POTENTIAL MASTER 1 backup servers retrieved from master TINA \\TINA There are 1 servers in domain MALIBOU on transport \Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} There are 1 domains in domain MALIBOU on transport \Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} browstat (PC) Status for domain MALIBOU on transport \Device\NetBT_Tcpip_{60A17BB1-D512-45A0-BD3B-89EA052A5A37} Browsing is active on domain. Master browser name is: TINA Master browser is running build 2600 1 backup servers retrieved from master TINA \\TINA There are 1 servers in domain MALIBOU on transport \Device\NetBT_Tcpip_{60A17BB1-D512-45A0-BD3B-89EA052A5A37} There are 1 domains in domain MALIBOU on transport \Device\NetBT_Tcpip_{60A17BB1-D512-45A0-BD3B-89EA052A5A37} Error when I try to On Wed, 23 Aug 2006 19:23:01 -0700, scotcan <scot***@discussions.microsoft.com>
wrote: Show quoteHide quote >Thanks for replying Chuck. Is NetBT consistently set? In your case, I'd recommend that you Enable it for> >I disabled MAC address filtering and uninstalled the IPX/SPX protocol and >now I don't get disconnected using wireless. I do however have another >problem now! I can ping both computers from each other and can access the >PC's shared files from the laptop but not vice versa! The error I am getting >now is: > >\\MARK\SharedDocs is not accessible. You might not have the permission to >use this network resource. Contact the administrator of this server to find >out if you have access permissions > >The network path was not found > >Both computers are running Win XP version 2002 with SP2. The PC has IE v7 >(beta) and the laptop has IE v6. I did what you asked me to do and pinged the >router from each computer and also ran ipconfig and browstat. Here are the >details: > >Laptop (wireless) & PC (wired) ping router connected >Pinging 192.168.65.254 with 32 bytes of data: >Reply from 192.168.65.254: bytes=32 time=1ms TTL=255 >Reply from 192.168.65.254: bytes=32 time=1ms TTL=255 >Reply from 192.168.65.254: bytes=32 time=2ms TTL=255 >Reply from 192.168.65.254: bytes=32 time=91ms TTL=255 > >Ping statistics for 192.168.65.254: > Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), >Approximate round trip times in milli-seconds: > Minimum = 1ms, Maximum = 91ms, Average = 23ms > >Laptop (wireless) & PC (wired) ping router not connected >Pinging 192.168.65.254 with 32 bytes of data: >Destination host unreachable. >Destination host unreachable. >Destination host unreachable. >Destination host unreachable. > >Ping statistics for 192.168.65.254: > Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), > >ipconfig /all (laptop connected) >Windows IP Configuration > Host Name . . . . . . . . . . . . : Mark > Primary Dns Suffix . . . . . . . : > Node Type . . . . . . . . . . . . : Mixed > IP Routing Enabled. . . . . . . . : No > WINS Proxy Enabled. . . . . . . . : No >Ethernet adapter Local Area Connection 3: > Media State . . . . . . . . . . . : Media disconnected > Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast >Ethernet NIC > Physical Address. . . . . . . . . : 00-0A-E4-45-5D-10 >Ethernet adapter Wireless Network Connection 10: > Connection-specific DNS Suffix . : > Description . . . . . . . . . . . : IEEE 802.11g Wireless >Cardbus/PCI Adapter > Physical Address. . . . . . . . . : 00-40-F4-DD-9C-B2 > Dhcp Enabled. . . . . . . . . . . : No > IP Address. . . . . . . . . . . . : 192.168.65.100 > Subnet Mask . . . . . . . . . . . : 255.255.255.0 > Default Gateway . . . . . . . . . : 192.168.65.254 > DNS Servers . . . . . . . . . . . : 206.191.0.140 > 106.191.0.210 > >ipconfig /all (laptop disconnected) >Windows IP Configuration > Host Name . . . . . . . . . . . . : Mark > Primary Dns Suffix . . . . . . . : > Node Type . . . . . . . . . . . . : Mixed > IP Routing Enabled. . . . . . . . : No > WINS Proxy Enabled. . . . . . . . : No >Ethernet adapter Local Area Connection 3: > Media State . . . . . . . . . . . : Media disconnected > Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast >Ethernet NIC > Physical Address. . . . . . . . . : 00-0A-E4-45-5D-10 >Ethernet adapter Wireless Network Connection 10: > Media State . . . . . . . . . . . : Media disconnected > Description . . . . . . . . . . . : IEEE 802.11g Wireless >Cardbus/PCI Adapter > Physical Address. . . . . . . . . : 00-40-F4-DD-9C-B2 > >ipconfig (PC connected) >Windows IP Configuration > Host Name . . . . . . . . . . . . : Tina > Primary Dns Suffix . . . . . . . : > Node Type . . . . . . . . . . . . : Hybrid > IP Routing Enabled. . . . . . . . : No > WINS Proxy Enabled. . . . . . . . : No >Ethernet adapter Local Area Connection: > Connection-specific DNS Suffix . : > Description . . . . . . . . . . . : Intel(R) PRO/100 M Network >Connection > Physical Address. . . . . . . . . : 00-07-E9-DE-88-41 > Dhcp Enabled. . . . . . . . . . . : No > IP Address. . . . . . . . . . . . : 192.168.65.101 > Subnet Mask . . . . . . . . . . . : 255.255.255.0 > Default Gateway . . . . . . . . . : 192.168.65.254 > DNS Servers . . . . . . . . . . . : 206.191.0.140 > 206.191.0.210 > >ipconfig (PC disconnected) >Windows IP Configuration > Host Name . . . . . . . . . . . . : Tina > Primary Dns Suffix . . . . . . . : > Node Type . . . . . . . . . . . . : Hybrid > IP Routing Enabled. . . . . . . . : No > WINS Proxy Enabled. . . . . . . . : No >Ethernet adapter Local Area Connection: > Media State . . . . . . . . . . . : Media disconnected > Description . . . . . . . . . . . : Intel(R) PRO/100 M Network >Connection > Physical Address. . . . . . . . . : 00-07-E9-DE-88-41 > >browstat (laptop) >Status for domain MALIBOU on transport >\Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} > Browsing is active on domain. > Master browser name is: TINA >Could not connect to registry, error = 53 Unable to determine build >of browser master: 53 > \\\\TINA . Version:05.01 Flags: 51203 NT POTENTIAL MASTER > 1 backup servers retrieved from master TINA > \\TINA > There are 1 servers in domain MALIBOU on transport >\Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} > There are 1 domains in domain MALIBOU on transport >\Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} > >browstat (PC) >Status for domain MALIBOU on transport >\Device\NetBT_Tcpip_{60A17BB1-D512-45A0-BD3B-89EA052A5A37} > Browsing is active on domain. > Master browser name is: TINA > Master browser is running build 2600 > 1 backup servers retrieved from master TINA > \\TINA > There are 1 servers in domain MALIBOU on transport >\Device\NetBT_Tcpip_{60A17BB1-D512-45A0-BD3B-89EA052A5A37} > There are 1 domains in domain MALIBOU on transport >\Device\NetBT_Tcpip_{60A17BB1-D512-45A0-BD3B-89EA052A5A37} each network connection. <http://nitecruzr.blogspot.com/2006/04/netbios-over-tcpip.html> http://nitecruzr.blogspot.com/2006/04/netbios-over-tcpip.html Then check for personal firewalls, incorrectly set. <http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html> http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html -- Cheers, Chuck, MS-MVP [Windows - Networking] http://nitecruzr.blogspot.com/ Paranoia is not a problem, when it's a normal response from experience. My email is AT DOT actual address pchuck mvps org. Thanks for getting back Chuck.
I already had netBT enabled on each computer but I rechecked to make sure and it's still enabled. I think my firewall (zone alarm) is set properly - I have added the IP addresses of each computer and also of the router and DNS server to the trusted zones, of each computer. I also tried to disable the firewall, anti virus and windows defender (which is installed on both) but I still can only browse shared files from the laptop (Mark) to the PC (Tina). When I try from the PC to the laptop I get an error. I tried to connect the laptop wired and it works that way - I can browse shared files in both directions. When the laptop is wired the IP address is 192.168.65.110 (as opposed to 192.168.65.100 when wireless), can this have something to do with the error? When I connect wirless my laptop (Mark) does not even appear in the workgroup computer list on the PC (Tina), but when wired it does! Also is the error 53 because the master browser is running Win XP Home? On Thu, 24 Aug 2006 19:08:02 -0700, scotcan <scot***@discussions.microsoft.com>
wrote: Show quoteHide quote >Thanks for getting back Chuck. From Mark, "ping tina". Does it return an IP address and start pinging? If> >I already had netBT enabled on each computer but I rechecked to make sure >and it's still enabled. I think my firewall (zone alarm) is set properly - I >have added the IP addresses of each computer and also of the router and DNS >server to the trusted zones, of each computer. I also tried to disable the >firewall, anti virus and windows defender (which is installed on both) but I >still can only browse shared files from the laptop (Mark) to the PC (Tina). >When I try from the PC to the laptop I get an error. > >I tried to connect the laptop wired and it works that way - I can browse >shared files in both directions. When the laptop is wired the IP address is >192.168.65.110 (as opposed to 192.168.65.100 when wireless), can this have >something to do with the error? When I connect wirless my laptop (Mark) does >not even appear in the workgroup computer list on the PC (Tina), but when >wired it does! > >Also is the error 53 because the master browser is running Win XP Home? name resolution works otherwise, then the "error = 53" is indeed caused by Tina running XP Home, and having no Remote Registry Service. But I'm more concerned by "There are 1 servers in domain" coming from both Mark and Tina. I presume that you did this after Mark became disconnected (WiFi). What portion of Mark connecting by WiFi to the router actually works? Let's start there. You may just have a WiFi connection problem. -- Cheers, Chuck, MS-MVP [Windows - Networking] http://nitecruzr.blogspot.com/ Paranoia is not a problem, when it's a normal response from experience. My email is AT DOT actual address pchuck mvps org. Thanks for replying Chuck.
When I ping "Tina" from Mark it returns an address and name resolution works fine both ways. The "1 server in domain" message is there all the time when I am connecting wieless and both "Mark" & "Tina" connected. When I change to wired it informs me that there are 2 servers in the domain (and I can communicate both ways). I noticed that browstat status only has one back up server retrieved from the master (\\TINA), and this happens both when I am connected wireless and wired - even though it sees 2 servers in the domain when wired! Is there a way I can manually add a server to the domain? With regards to connecting to the router via WiFi from Mark, I can connect and change the settings and also browse the internet ok. This is the normal way I connect when using the laptop (Mark). Below are the browstat status for wireless and wired, with bot Mark and Tina connected (from Mark) WiFi Browstat: Status for domain MALIBOU on transport \Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} Browsing is active on domain. Master browser name is: TINA Could not connect to registry, error = 53 Unable to determine build of browser master: 53 \\\\TINA . Version:05.01 Flags: 51203 NT POTENTIAL MASTER 1 backup servers retrieved from master TINA \\TINA There are 1 servers in domain MALIBOU on transport \Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} There are 1 domains in domain MALIBOU on transport \Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} Wired Browstat: Status for domain MALIBOU on transport \Device\NetBT_Tcpip_{B29DD792-B553-48AC-A921-1DA068EF28A6} Browsing is active on domain. Master browser name is: TINA Could not connect to registry, error = 53 Unable to determine build of browser master: 53 \\\\TINA . Version:05.01 Flags: 51203 NT POTENTIAL MASTER 1 backup servers retrieved from master TINA \\TINA There are 2 servers in domain MALIBOU on transport \Device\NetBT_Tcpip_{B29DD792-B553-48AC-A921-1DA068EF28A6} There are 1 domains in domain MALIBOU on transport \Device\NetBT_Tcpip_{B29DD792-B553-48AC-A921-1DA068EF28A6} The data is the same when taken from Tina On Fri, 25 Aug 2006 19:14:01 -0700, scotcan <scot***@discussions.microsoft.com>
wrote: Show quoteHide quote >Thanks for replying Chuck. OK, if Mark has Internet when connected WiFi, then it's not a connectivity> >When I ping "Tina" from Mark it returns an address and name resolution works >fine both ways. > >The "1 server in domain" message is there all the time when I am connecting >wieless and both "Mark" & "Tina" connected. When I change to wired it informs >me that there are 2 servers in the domain (and I can communicate both ways). > >I noticed that browstat status only has one back up server retrieved from >the master (\\TINA), and this happens both when I am connected wireless and >wired - even though it sees 2 servers in the domain when wired! Is there a >way I can manually add a server to the domain? > >With regards to connecting to the router via WiFi from Mark, I can connect >and change the settings and also browse the internet ok. This is the normal >way I connect when using the laptop (Mark). > >Below are the browstat status for wireless and wired, with bot Mark and Tina >connected (from Mark) > >WiFi Browstat: >Status for domain MALIBOU on transport >\Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} > Browsing is active on domain. > Master browser name is: TINA >Could not connect to registry, error = 53 Unable to determine build >of browser master: 53 > \\\\TINA . Version:05.01 Flags: 51203 NT POTENTIAL MASTER > 1 backup servers retrieved from master TINA > \\TINA > There are 1 servers in domain MALIBOU on transport >\Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} > There are 1 domains in domain MALIBOU on transport >\Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} > >Wired Browstat: >Status for domain MALIBOU on transport >\Device\NetBT_Tcpip_{B29DD792-B553-48AC-A921-1DA068EF28A6} > Browsing is active on domain. > Master browser name is: TINA >Could not connect to registry, error = 53 Unable to determine build >of browser master: 53 > \\\\TINA . Version:05.01 Flags: 51203 NT POTENTIAL MASTER > 1 backup servers retrieved from master TINA > \\TINA > There are 2 servers in domain MALIBOU on transport >\Device\NetBT_Tcpip_{B29DD792-B553-48AC-A921-1DA068EF28A6} > There are 1 domains in domain MALIBOU on transport >\Device\NetBT_Tcpip_{B29DD792-B553-48AC-A921-1DA068EF28A6} > >The data is the same when taken from Tina issue. Ditto for pinging successfully by name. So let's look at LSP / Winsock, on both computers. Start with Mark. Test whenever you make any changes. <http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html> http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html -- Cheers, Chuck, MS-MVP [Windows - Networking] http://nitecruzr.blogspot.com/ Paranoia is not a problem, when it's a normal response from experience. My email is AT DOT actual address pchuck mvps org. Hi chuck, thanks for getting back to me.
I ran the LSP/Winsock fix programs that you suggested and now I can file share in both directions (both wired & wireless). I noticed when I entered an Ip address (yahoo.com)in the browser, then tried the domain name it browsed to a different page. I ran LSP fix first and it stated there were no errors but when I tried the yahoo test again it was fine. I ran the rest of the diagnostics you suggested to be sure. The only thing I am unsure of is that browstat status still only has 1 back up server retrieved from the master, but sees 2 servers in the domain. Is this ok or do I still need to have 2 back up servers? Status for domain MALIBOU on transport \Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} Browsing is active on domain. Master browser name is: TINA Could not connect to registry, error = 53 Unable to determine build of browser master: 53 \\\\TINA . Version:05.01 Flags: 51203 NT POTENTIAL MASTER 1 backup servers retrieved from master TINA \\TINA There are 2 servers in domain MALIBOU on transport \Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} There are 1 domains in domain MALIBOU on transport \Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} On Mon, 28 Aug 2006 16:37:02 -0700, scotcan <scot***@discussions.microsoft.com>
wrote: Show quoteHide quote >Hi chuck, thanks for getting back to me. In any domain or workgroup, you need a master browser, and a backup browser.> >I ran the LSP/Winsock fix programs that you suggested and now I can file >share in both directions (both wired & wireless). I noticed when I entered an >Ip address (yahoo.com)in the browser, then tried the domain name it browsed >to a different page. I ran LSP fix first and it stated there were no errors >but when I tried the yahoo test again it was fine. I ran the rest of the >diagnostics you suggested to be sure. > >The only thing I am unsure of is that browstat status still only has 1 back >up server retrieved from the master, but sees 2 servers in the domain. Is >this ok or do I still need to have 2 back up servers? > >Status for domain MALIBOU on transport >\Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} > Browsing is active on domain. > Master browser name is: TINA >Could not connect to registry, error = 53 Unable to determine build >of browser master: 53 > \\\\TINA . Version:05.01 Flags: 51203 NT POTENTIAL MASTER > 1 backup servers retrieved from master TINA > \\TINA > There are 2 servers in domain MALIBOU on transport >\Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} > There are 1 domains in domain MALIBOU on transport >\Device\NetBT_Tcpip_{8368D7E1-3205-4DE5-9882-2F6F70F3C6D6} You need 1 backup browser for every 32 computers. If you have less than 32 computers, your backup and master may be the same computer. So 1 backup is good. Does each browstat log show the same? If so, then you are done. You can read about the browser: <http://nitecruzr.blogspot.com/2005/04/nt-browser-or-why-cant-i-always-see.html> http://nitecruzr.blogspot.com/2005/04/nt-browser-or-why-cant-i-always-see.html -- Cheers, Chuck, MS-MVP [Windows - Networking] http://nitecruzr.blogspot.com/ Paranoia is not a problem, when it's a normal response from experience. My email is AT DOT actual address pchuck mvps org.
Small network
One Way Ping How to switch different credential when accessing a shared folder XP Home Edition SP2 & Pro SP2 network problem Network wide accounts Win XP Computer Restarting Unattended No network access after fixed trojan and adware infection despite correct settings. howto configure client computers to use server 2003 internet conne peer to peer Router dropping packets and blocking Remote Desktop connection |
|||||||||||||||||||||||