|
windows
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
router problemsuccess.. 1) So i set the router up i.e. wires, connect it up to the computer, as shown on the manual.. There's a couple of CD's that come with it but non seem to have any drivers or anything of the sort, so i presume u just plug and play. 2)configure the ADSL Gateway. i can't get beyond this point. basically it tells u to go to the internet browser and type http:/192.168.1.1 or http:/192.168.0.1 and press enter. this enter network password screen should come up or so it says, but nothing comes up on mine besides this box that asks u if u wanna work offline or connect. i can't get beyond this point.. i don't see where i should be putting my username password etc.. This is basically what i've done so far. What am i missing? router:linksys wireless-g adsl home gateway, model: wag354g (it does both wireless and wired) computer: 1 gig ram 160 gigs windows xp pro sp2 3.00gz pentium d Internet connection: adsl 1 meg, ukonline -- Man oh man! It should be double //, for example http://192.168.0.1.
Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "k0103707" <k01***@yahoo.co.uk> wrote in message news:7D5734EB-ABC4-42A3-B5F0-4D6DDF680C22@microsoft.com... trying to get the internet working through this router, but not having any success.. 1) So i set the router up i.e. wires, connect it up to the computer, as shown on the manual.. There's a couple of CD's that come with it but non seem to have any drivers or anything of the sort, so i presume u just plug and play. 2)configure the ADSL Gateway. i can't get beyond this point. basically it tells u to go to the internet browser and type http:/192.168.1.1 or http:/192.168.0.1 and press enter. this enter network password screen should come up or so it says, but nothing comes up on mine besides this box that asks u if u wanna work offline or connect. i can't get beyond this point.. i don't see where i should be putting my username password etc.. This is basically what i've done so far. What am i missing? router:linksys wireless-g adsl home gateway, model: wag354g (it does both wireless and wired) computer: 1 gig ram 160 gigs windows xp pro sp2 3.00gz pentium d Internet connection: adsl 1 meg, ukonline -- Man oh man! You need to EITHER set your computer to use automatic IP address assignment
(DHCP) OR assign an address manually that's within the router's subnet. To see if your computer has acquired an IP address, type IPCONFIG /ALL at a commandprompt. (If it says 167... then it hasn't acquired one, that is the default) From what I can find out, the wag354g appears to use 192.168.1.x addresses. You then need to type the IP address of the router into your browser. This will only be a single address, and you must use the right one. The literature should tell you. In article <19675D54-C8C9-44B6-A092-D21E4A44B***@microsoft.com>, Ian
<I**@discussions.microsoft.com> wrote: Show quoteHide quote >>trying to get the internet working through this router, but not having any I agree, Ian, with one minor point to make: the IP address that's>>success.. >>1) So i set the router up i.e. wires, connect it up to the computer, as >>shown on the manual.. There's a couple of CD's that come with it but non seem >>to have any drivers or anything of the sort, so i presume u just plug and >>play. >> >>2)configure the ADSL Gateway. i can't get beyond this point. basically it >>tells u to go to the internet browser and type http:/192.168.1.1 or >>http:/192.168.0.1 and press enter. this enter network password screen should >>come up or so it says, but nothing comes up on mine besides this box that >>asks u if u wanna work offline or connect. i can't get beyond this point.. i >>don't see where i should be putting my username password etc.. >> >>This is basically what i've done so far. What am i missing? >> >>router:linksys wireless-g adsl home gateway, model: wag354g (it does both >>wireless and wired) >> >>computer: >>1 gig ram >>160 gigs >>windows xp pro sp2 >>3.00gz pentium d >> >>Internet connection: adsl 1 meg, ukonline > >You need to EITHER set your computer to use automatic IP address assignment >(DHCP) OR assign an address manually that's within the router's subnet. > >To see if your computer has acquired an IP address, type IPCONFIG /ALL at a >commandprompt. (If it says 167... then it hasn't acquired one, that is the >default) > >From what I can find out, the wag354g appears to use 192.168.1.x addresses. > >You then need to type the IP address of the router into your browser. This >will only be a single address, and you must use the right one. The literature >should tell you. assigned when a network connection is configured to obtain an IP address automatically and it can't contact a DHCP server starts with 169.254. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com "k0103707" <k01***@yahoo.co.uk> wrote in message No routers are definitely not plug and play. I setup my Linksys router in news:7D5734EB-ABC4-42A3-B5F0-4D6DDF680C22@microsoft.com... > trying to get the internet working through this router, but not having any > success.. > 1) So i set the router up i.e. wires, connect it up to the computer, as > shown on the manual.. There's a couple of CD's that come with it but non > seem > to have any drivers or anything of the sort, so i presume u just plug and > play. > less than 10 minutes by using the CD. > 2)configure the ADSL Gateway. i can't get beyond this point. basically it You haven't gotten to first base yet. Doesn't the fine manual tell you to > tells u to go to the internet browser and type http:/192.168.1.1 or > http:/192.168.0.1 and press enter. this enter network password screen > should > come up or so it says, but nothing comes up on mine besides this box that > asks u if u wanna work offline or connect. i can't get beyond this point.. > i > don't see where i should be putting my username password etc.. > > This is basically what i've done so far. What am i missing? > insert the CD to perform the installation? Show quoteHide quote > > router:linksys wireless-g adsl home gateway, model: wag354g (it does both > wireless and wired) > > computer: > 1 gig ram > 160 gigs > windows xp pro sp2 > 3.00gz pentium d > > Internet connection: adsl 1 meg, ukonline > -- > Man oh man! Jim thank you guys, it works! basically found out the ip, which was 192.168.1.1
typed this into internet browser and enable the lan connection in network connection.. voila! 
Other interesting topics
Cannot view Windows 2003 server on Windows Xp workstation??
Internet Connection Sharing and 2 PCs One Computer Connected, Other Not Printer sharing with Guest disabled Using 2 Network Cards Need a LAN speed test utility Can't connect to home network but can still access internet through router Security Permissions over a home network can't get permissions on a LAN After loging into cable internet my Wireless connectivity goes off |
|||||||||||||||||||||||
