Plz. help me in this regards.

I have 2 labs of 10 pcs each and 1 server connected to broadband

server's ip address: 192.168.0.1

Lab 1 --- 192.168.0.2 to 192.168.0.12

In Lab 1 as i give gateway 192.168.0.1 ,, all things works fine. ,,
internet is also fine.


But i want to change my lab2 ips are as

192.168.1.2 to 192.168.1.11

After putting this value ,, i can't connect to the internet server.


plz. give solution of the problem.. Eagarly waiting for reply..

Regards

Deepak

In article <1163453568.616126.86***@h54g2000cwb.googlegroups.com>,
Show quoteHide quoteI assume that the subnet mask on each computer is 255.255.255.0.  If
so, the lab2 computers are on a different subnet than the server, so
they can't communicate with it:

   Lab1 and server: 192.168.0.x
   Lab2: 192.168.1.x

One solution would be to change the subnet mask on each computer to
255.255.0.0.  Then, all of the computers would be in the 192.168.x.x.
subnet.   However, lab1 computers would then be able to communicate
with lab2 computers.

If you don't want that, a different (and more complicated) solution is
needed.  In that case, please post another news group message with
complete details of the type of broadband connection and all of the
associated network equipment to help people suggest a solution.

Internet Gateway
How do I send message to another computer?
Accessing PC over net??
Step By Step For Remote Connection
Sharing folder fails
IE 6. Windows keep 'hanging'
2 PC Home Network - Painfully Slow File Transfer
Can math-disabled person learn computer networking?
IE7 conflicts with Access 2002?
firewall config not using AVG