|
windows
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
Network bridge balloonHi there,
My problem isn't really critical to the performance of my PC, but still rather annoying, basicly I was wondering if there is anyway to stop the "Network Bridge (Network Bridge) a network cable is unplugged" balloon from apearing every few seconds when one of my other computers on the network get turned off without having to actualy disable any network adapters. I ask this because I run a game in a windowed mode, and when ever the balloon apears the game will almost completely stop responding until the balloon disapears again. Any help would be greatly appreciated, thanks :) You haven't given us a great deal of information!
This shouldn't happen with a typical network setup. Please tell us at least your network configuration and hardware. On Fri, 17 Nov 2006 17:52:01 -0800, Obelisk <Obel***@discussions.microsoft.com> wrote: >Hi there, Please respond to the Newsgroup, so that others may benefit from the exchange.>My problem isn't really critical to the performance of my PC, but still >rather annoying, basicly I was wondering if there is anyway to stop the >"Network Bridge (Network Bridge) a network cable is unplugged" balloon from >apearing every few seconds when one of my other computers on the network get >turned off without having to actualy disable any network adapters. > >I ask this because I run a game in a windowed mode, and when ever the >balloon apears the game will almost completely stop responding until the >balloon disapears again. > >Any help would be greatly appreciated, thanks :) Peter R. Fletcher Sorry, I'm new to this and don't really know alot about computers!
I'm running Windows XP Home Edition. There are two other computers that connect through this one to the internet using Internet connection sharing. One connects to my computer using a Wireless Network Connection (Peer-to-Peer) that causes me no problems when it gets turned off. The other is using a "Realtek RTL8139/810x Familiy Fast Ethernet NIC" cable connection, and when this one gets turned off the balloon begins to pop up. Both connections are bridged and both the other computers are running windows XP Home Edition. If there is any other information that I have missed that might be of help, please let me know, thanks. Show quoteHide quote "Peter R. Fletcher" wrote: > You haven't given us a great deal of information! > > This shouldn't happen with a typical network setup. Please tell us at > least your network configuration and hardware. > > On Fri, 17 Nov 2006 17:52:01 -0800, Obelisk > <Obel***@discussions.microsoft.com> wrote: > > >Hi there, > >My problem isn't really critical to the performance of my PC, but still > >rather annoying, basicly I was wondering if there is anyway to stop the > >"Network Bridge (Network Bridge) a network cable is unplugged" balloon from > >apearing every few seconds when one of my other computers on the network get > >turned off without having to actualy disable any network adapters. > > > >I ask this because I run a game in a windowed mode, and when ever the > >balloon apears the game will almost completely stop responding until the > >balloon disapears again. > > > >Any help would be greatly appreciated, thanks :) > > Please respond to the Newsgroup, so that others may benefit from the exchange. > Peter R. Fletcher > No, that's enough.
The usual way of making a computer to computer network connection is via a network hub (rare nowadays) or switch. Each computer's network hardware only monitors its cable connection to the switch. As long as the switch remains powered up and the cable remains plugged in at both ends, the connection is seen as live - it doesn't matter if another computer connected to the same switch is powered down, or even if nothing else is connected to the switch, because each connection to the switch is independent. You are presumabley making the connection between your main system and the directly connected one by means of a crossover cable. This is fine, and saves you the small cost of an unnecessary network switch, but it means that if you turn off either system, the other's network card sees a network cable with nothing at the other end, and (by default, at least) tells you about it. If you view the Network Connections on your main system, and display the Properties of the "Realtek RTL8139/810x Familiy Fast Ethernet NIC", there should be a ticked box towards the bottom left of the first tab which says: "Notify me when this connection has limited or no connectivity". Untick it, press OK, then restart the system (the change won't appear to have "taken" until you reboot). This should stop your main system bothering you when the other system is off. It will, of course, also prevent it from notifying you if someone has tripped over the cable and pulled it out, but you can't have everything! On Sun, 19 Nov 2006 05:18:02 -0800, Obelisk <Obel***@discussions.microsoft.com> wrote: Show quoteHide quote >Sorry, I'm new to this and don't really know alot about computers! Please respond to the Newsgroup, so that others may benefit from the exchange.> >I'm running Windows XP Home Edition. > >There are two other computers that connect through this one to the internet >using Internet connection sharing. >One connects to my computer using a Wireless Network Connection >(Peer-to-Peer) that causes me no problems when it gets turned off. >The other is using a "Realtek RTL8139/810x Familiy Fast Ethernet NIC" cable >connection, and when this one gets turned off the balloon begins to pop up. > >Both connections are bridged and both the other computers are running >windows XP Home Edition. > >If there is any other information that I have missed that might be of help, >please let me know, thanks. > > >"Peter R. Fletcher" wrote: > >> You haven't given us a great deal of information! >> >> This shouldn't happen with a typical network setup. Please tell us at >> least your network configuration and hardware. >> >> On Fri, 17 Nov 2006 17:52:01 -0800, Obelisk >> <Obel***@discussions.microsoft.com> wrote: >> >> >Hi there, >> >My problem isn't really critical to the performance of my PC, but still >> >rather annoying, basicly I was wondering if there is anyway to stop the >> >"Network Bridge (Network Bridge) a network cable is unplugged" balloon from >> >apearing every few seconds when one of my other computers on the network get >> >turned off without having to actualy disable any network adapters. >> > >> >I ask this because I run a game in a windowed mode, and when ever the >> >balloon apears the game will almost completely stop responding until the >> >balloon disapears again. >> > >> >Any help would be greatly appreciated, thanks :) >> >> Please respond to the Newsgroup, so that others may benefit from the exchange. >> Peter R. Fletcher >> Peter R. Fletcher Thank you for your help, I've found the "Notify me when this connection has
limited or no connectivity" checkbox and it has fixed my problem. Thanks again, you were very helpfull, I really appreciate it :) Show quoteHide quote "Peter R. Fletcher" wrote: > No, that's enough. > > The usual way of making a computer to computer network connection is > via a network hub (rare nowadays) or switch. Each computer's network > hardware only monitors its cable connection to the switch. As long as > the switch remains powered up and the cable remains plugged in at both > ends, the connection is seen as live - it doesn't matter if another > computer connected to the same switch is powered down, or even if > nothing else is connected to the switch, because each connection to > the switch is independent. You are presumabley making the connection > between your main system and the directly connected one by means of a > crossover cable. This is fine, and saves you the small cost of an > unnecessary network switch, but it means that if you turn off either > system, the other's network card sees a network cable with nothing at > the other end, and (by default, at least) tells you about it. > > If you view the Network Connections on your main system, and display > the Properties of the "Realtek RTL8139/810x Familiy Fast Ethernet > NIC", there should be a ticked box towards the bottom left of the > first tab which says: "Notify me when this connection has limited or > no connectivity". Untick it, press OK, then restart the system (the > change won't appear to have "taken" until you reboot). This should > stop your main system bothering you when the other system is off. It > will, of course, also prevent it from notifying you if someone has > tripped over the cable and pulled it out, but you can't have > everything! > > On Sun, 19 Nov 2006 05:18:02 -0800, Obelisk > <Obel***@discussions.microsoft.com> wrote: > > >Sorry, I'm new to this and don't really know alot about computers! > > > >I'm running Windows XP Home Edition. > > > >There are two other computers that connect through this one to the internet > >using Internet connection sharing. > >One connects to my computer using a Wireless Network Connection > >(Peer-to-Peer) that causes me no problems when it gets turned off. > >The other is using a "Realtek RTL8139/810x Familiy Fast Ethernet NIC" cable > >connection, and when this one gets turned off the balloon begins to pop up. > > > >Both connections are bridged and both the other computers are running > >windows XP Home Edition. > > > >If there is any other information that I have missed that might be of help, > >please let me know, thanks. > > > > > >"Peter R. Fletcher" wrote: > > > >> You haven't given us a great deal of information! > >> > >> This shouldn't happen with a typical network setup. Please tell us at > >> least your network configuration and hardware. > >> > >> On Fri, 17 Nov 2006 17:52:01 -0800, Obelisk > >> <Obel***@discussions.microsoft.com> wrote: > >> > >> >Hi there, > >> >My problem isn't really critical to the performance of my PC, but still > >> >rather annoying, basicly I was wondering if there is anyway to stop the > >> >"Network Bridge (Network Bridge) a network cable is unplugged" balloon from > >> >apearing every few seconds when one of my other computers on the network get > >> >turned off without having to actualy disable any network adapters. > >> > > >> >I ask this because I run a game in a windowed mode, and when ever the > >> >balloon apears the game will almost completely stop responding until the > >> >balloon disapears again. > >> > > >> >Any help would be greatly appreciated, thanks :) > >> > >> Please respond to the Newsgroup, so that others may benefit from the exchange. > >> Peter R. Fletcher > >> > > Please respond to the Newsgroup, so that others may benefit from the exchange. > Peter R. Fletcher >
Can malware change IP address on Windows XP machine
LAN with MAC and PC Network Novice needs alot of help with win98 and xp setup. Event ID 5719 NETLOGON 2 Network Cards / 2 Lans / 2 Routers / XP PRO Peer-to-peer browsing limited to oneway traffic shutting down my network Event ID 5783 - NETLOGON VPN connection and web browsing ADSL with NAT |
|||||||||||||||||||||||