|
windows
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
NIC can't bind IP...?I have a Dell Latitude D610 with an integrated NIC on the motherboard. The OS is XP Pro. I very frequently change network settings because I move the laptop from place to place. I typically use software (NetSwitcher) to make those changes. When in my office, I use a static IP address. For the last few weeks, I often have the following problem: When I run NetSwitcher, the NIC hangs with the message "Acquiring IP address." At that point, I had been able to resolve matters by clicking on "Repair" in the Net Properties. But now, even that technique often fails. "Repair" leaves things just as they were, with the status as "Acquiring IP address." If I run IP config I see that there is no IP address assigned. Then, if I attempt either a "release" or a "renew" I get a message telling me that the NIC is not in a state that will allow the command to take effect. I also get a System error telling me that there is a conflict on our Lan because two systems have the same IP address. I have checked very carefully, and there is, in fact, no such conflict. If I reboot, I can usually (but not always) assign the IP address, and with that, all is well. On occasion, I must reboot several times. So, with all that as background... The folks at Dell tell me that this situation is likely to indicate that the NIC is flaky, and, they say, the (out of warrantee) repair will require a new MOBO. With what I have described, could anything else be the cause? That is, might this be a software or driver problem? And if so, how might I diagnose and repair the difficulty? Many thanks for any help, -- Kenneth If you email... Please remove the "SPAMLESS." On Mon, 12 Jan 2009 13:34:28 -0500, Kenneth
<usenet@soleSPAMLESSassociates.com> wrote: Show quoteHide quote > Have you un-installed and re-installed the NIC?>Howdy, > >I have a Dell Latitude D610 with an integrated NIC on the >motherboard. The OS is XP Pro. > >I very frequently change network settings because I move the >laptop from place to place. I typically use software >(NetSwitcher) to make those changes. When in my office, I >use a static IP address. > >For the last few weeks, I often have the following problem: > >When I run NetSwitcher, the NIC hangs with the message >"Acquiring IP address." At that point, I had been able to >resolve matters by clicking on "Repair" in the Net >Properties. > >But now, even that technique often fails. "Repair" leaves >things just as they were, with the status as "Acquiring IP >address." > >If I run IP config I see that there is no IP address >assigned. Then, if I attempt either a "release" or a "renew" >I get a message telling me that the NIC is not in a state >that will allow the command to take effect. > >I also get a System error telling me that there is a >conflict on our Lan because two systems have the same IP >address. I have checked very carefully, and there is, in >fact, no such conflict. > >If I reboot, I can usually (but not always) assign the IP >address, and with that, all is well. On occasion, I must >reboot several times. > >So, with all that as background... > >The folks at Dell tell me that this situation is likely to >indicate that the NIC is flaky, and, they say, the (out of >warrantee) repair will require a new MOBO. > >With what I have described, could anything else be the >cause? That is, might this be a software or driver problem? > >And if so, how might I diagnose and repair the difficulty? > >Many thanks for any help, If the NIC is bad, replacing the motherboard seems like a drastic solution to me. It would be much simpler and less expensive to buy a new PC Card NIC and plug it in. -- Best Wishes, Steve Winograd, MS-MVP (Windows Desktop Experience) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com On Tue, 13 Jan 2009 02:25:38 -0700, Steve Winograd
<bc0705***@comcast.net> wrote: > Hi Steve,>Have you un-installed and re-installed the NIC? I have not... I take it that you would suggest I give that a try? Many thanks, -- Kenneth If you email... Please remove the "SPAMLESS." On Tue, 13 Jan 2009 11:25:54 -0500, Kenneth
<usenet@soleSPAMLESSassociates.com> wrote: >On Tue, 13 Jan 2009 02:25:38 -0700, Steve Winograd Yes.><bc0705***@comcast.net> wrote: > >> >>Have you un-installed and re-installed the NIC? > >Hi Steve, > >I have not... > >I take it that you would suggest I give that a try? > >Many thanks, You're welcome. :-) Please let us know if it helps. -- Best Wishes, Steve Winograd, MS-MVP (Windows Desktop Experience) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com On Tue, 13 Jan 2009 23:18:07 -0700, Steve Winograd
<bc0705***@comcast.net> wrote: Show quoteHide quote >On Tue, 13 Jan 2009 11:25:54 -0500, Kenneth Hi Steve,><usenet@soleSPAMLESSassociates.com> wrote: > >>On Tue, 13 Jan 2009 02:25:38 -0700, Steve Winograd >><bc0705***@comcast.net> wrote: >> >>> >>>Have you un-installed and re-installed the NIC? >> >>Hi Steve, >> >>I have not... >> >>I take it that you would suggest I give that a try? >> >>Many thanks, > >Yes. > >You're welcome. :-) > >Please let us know if it helps. I un-installed and re-installed the NIC. The problem seems the same. I do see though that if it gets "stuck" acquiring the IP address, I can click Disable, then Enable, and all functions properly. That is certainly easier than doing a re-boot. If the status remains unchanged, I could certainly tolerate the situation, and that would be quite a bit less costly than replacing the mobo as suggested by my friends at Dell. I am, by the way, using the most recent driver for the NIC. Thanks for any further thoughts, -- Kenneth If you email... Please remove the "SPAMLESS." On Jan 14, 5:04 pm, Kenneth <use...@soleSPAMLESSassociates.com> wrote:
Show quoteHide quote > On Tue, 13 Jan 2009 23:18:07 -0700, Steve Winograd Check the firewall software, if not using the XP built in one.> > > > <bc0705***@comcast.net> wrote: > >On Tue, 13 Jan 2009 11:25:54 -0500, Kenneth > ><use...@soleSPAMLESSassociates.com> wrote: > > >>On Tue, 13 Jan 2009 02:25:38 -0700, Steve Winograd > >><bc0705***@comcast.net> wrote: > > >>>Have you un-installed and re-installed the NIC? > > >>Hi Steve, > > >>I have not... > > >>I take it that you would suggest I give that a try? > > >>Many thanks, > > >Yes. > > >You're welcome. :-) > > >Please let us know if it helps. > > Hi Steve, > > I un-installed and re-installed the NIC. > > The problem seems the same. > > I do see though that if it gets "stuck" acquiring the IP > address, I can click Disable, then Enable, and all functions > properly. > > That is certainly easier than doing a re-boot. > > If the status remains unchanged, I could certainly tolerate > the situation, and that would be quite a bit less costly > than replacing the mobo as suggested by my friends at Dell. > > I am, by the way, using the most recent driver for the NIC. > > Thanks for any further thoughts, > -- > Kenneth > > If you email... Please remove the "SPAMLESS." On Wed, 14 Jan 2009 09:23:01 -0800 (PST), smlunatick
<yves***@gmail.com> wrote: >Check the firewall software, if not using the XP built in one. Hi again,Nothing on (the system is behind the router... Thanks again, -- Kenneth If you email... Please remove the "SPAMLESS."
WinXP SP2 lost communication.
Ad Hoc Problems You do not have access permission... Error Message: Remote Desktop ActiveX control Double clicking a mapped network drive opens up the "My Documents" internet speeds How to change saved password Two DSL connections / networks, set one Intranet Only? Cannot access administrative shares on XP from a W2K computer Network dosent work can not renew IP Address |
|||||||||||||||||||||||