I have a 2-Wire 2700HG that I have hooked up in my house.  I had a laptop
running wirelessly on it and recently added a desktop.  The laptop is running
XP Home and the desktop is running XP Media Center.  I have tried to set up a
network between the two and share files.  I have run the network setup
wizard, but I have not been able to see the network after setting it up.  The
desktop is conected via ethernet cable. 

If anyone has any advice on how to set up this network so I can share files
and printers that would be very nice.  I beleive I should be able to be on
the same network even though one computer is wireless and the other is
ethernet.  I must be missing something.  Any help would be appreciated. 
Thanks

Dave

daveydb wrote:

Show quoteHide quoteThe fact that one computer connects to the Local Area Network (LAN) wired
and the other wireless is irrelevant. I'm assuming that both computers can
get to the Internet. If not, please provide that information.

Problems sharing files between computers on a network are generally caused
by 1) a misconfigured firewall or overlooked firewall (including a stateful
firewall in a VPN); or 2) inadvertently running two firewalls such as the
built-in Windows Firewall and a third-party firewall; and/or 3) not having
identical user accounts and passwords on all Workgroup machines; 4) trying
to create shares where the operating system does not permit it.

A. Configure firewalls on all machines to allow the Local Area Network (LAN)
traffic as trusted. With Windows Firewall, this means allowing File/Printer
Sharing on the Exceptions tab. Normally running the Network Setup Wizard on
XP will take care of this for those machines.The only "gotcha" is that this
will turn on the XPSP2 Windows Firewall. If you aren't running a
third-party firewall or have an antivirus/security program with its own
firewall component, then you're fine.  With third-party firewalls, I
usually configure the LAN allowance with an IP range. Ex. would be
192.168.1.0-192.168.1.254. Obviously you would substitute your correct
subnet. Refer to any third party security program's Help or user forums for
how to properly configure its firewall. Do not run more than one firewall.
DO NOT TURN OFF FIREWALLS; CONFIGURE THEM CORRECTLY.

B. For ease of organization, put all computers in the same Workgroup. This
is done from the System applet in Control Panel, Computer Name tab.

C. Create matching user accounts and passwords on all machines. You do not
need to be logged into the same account on all machines and the passwords
assigned to each user account can be different; the accounts/passwords just
need to exist and match on all machines. DO NOT NEGLECT TO CREATE
PASSWORDS, EVEN IF ONLY SIMPLE ONES. If you wish a machine to boot directly
to the Desktop (into one particular user's account) for convenience, you
can do this. The instructions at this link work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

D. If one or more of the computers is XP Pro or Media Center, turn off
Simple File Sharing (Folder Options>View tab).

E. Create shares as desired. XP Home does not permit sharing of users' home
directories or Program Files, but you can share folders inside those
directories. A better choice is to simply use the Shared Documents folder.

F. After you have file sharing working (and have tested this by exchanging a
file between all machines), if you want to share a printer connected
locally to one of your computers, share it out from that machine. Then go
to the printer mftr.'s website and download the latest drivers for the
correct operating system(s). Install them on the target machine(s). The
printer should be seen during the installation routine. If it is not,
install the drivers and then use the Add Printer Wizard. In some instances,
certain printers need to be installed as Local printers but that is outside
of this response.

Malke

How many XP PCs can be on a network?
Networking two pc's
No DNS servers listed in IPCONFIG /all
strange internet problem
Password Issue when sharing files between VISTA & XP machines
No process listening on port 445
connecting to remote office site
network printer
Core Utilization Monitoring
Network Share and Nethood Issue