> I've had a Linksys WRT54GS router working well for some time. I
> decided to extend the range in my house by adding a WAP (WAP54G?).
> Seemed straightforward. Assign it the same SSID as my router and i
> could seamlessly move between the two - correct? Not working. I have
> the WAP plugged into my LAN, and my laptop picks up a full signal, but
> gets the "Limited or No Connectivity" message when connected.
>
> What am I missing here? Maybe the Gateway address is wrong on the WAP?
> SHould it be that of my modem (192.168.1.1) or my router
> (192.168.2.1)? Or is it something completely different? Am at a loss
> here.
>
> Thanks,
> Doug

> Aloha dougawe***@gmail.com,
>
> On the other end of the LAN connection from your WAP is your WRT or some
> other hub/switch?
>
> What device hands out your DHCP?  I'd have the WRT doing DHCP and I'd plug
> the WAP (via the wall) into the WRT.  Gateway address should be the WRT.
>
> -Ben-
> Ben M. Schorr - MVP
> Roland Schorr & Tower
> http://www.rolandschorr.com
> Microsoft OneNote FAQ: http://www.factplace.com/onenotefaq.htm
>
> > I've had a Linksys WRT54GS router working well for some time. I
> > decided to extend the range in my house by adding a WAP (WAP54G?).
> > Seemed straightforward. Assign it the same SSID as my router and i
> > could seamlessly move between the two - correct? Not working. I have
> > the WAP plugged into my LAN, and my laptop picks up a full signal, but
> > gets the "Limited or No Connectivity" message when connected.
> >
> > What am I missing here? Maybe the Gateway address is wrong on the WAP?
> > SHould it be that of my modem (192.168.1.1) or my router
> > (192.168.2.1)? Or is it something completely different? Am at a loss
> > here.
> >
> > Thanks,
> > Doug

> My router is my DHCP server - so, my gateway on the WAP should be the
> router's IP address?
>
> Ben M. Schorr - MVP wrote:
>
>> Aloha dougawe***@gmail.com,
>>
>> On the other end of the LAN connection from your WAP is your WRT or
>> some other hub/switch?
>>
>> What device hands out your DHCP?  I'd have the WRT doing DHCP and I'd
>> plug the WAP (via the wall) into the WRT.  Gateway address should be
>> the WRT.
>>
>> -Ben-
>> Ben M. Schorr - MVP
>> Roland Schorr & Tower
>> http://www.rolandschorr.com
>> Microsoft OneNote FAQ: http://www.factplace.com/onenotefaq.htm
>>> I've had a Linksys WRT54GS router working well for some time. I
>>> decided to extend the range in my house by adding a WAP (WAP54G?).
>>> Seemed straightforward. Assign it the same SSID as my router and i
>>> could seamlessly move between the two - correct? Not working. I have
>>> the WAP plugged into my LAN, and my laptop picks up a full signal,
>>> but gets the "Limited or No Connectivity" message when connected.
>>>
>>> What am I missing here? Maybe the Gateway address is wrong on the
>>> WAP? SHould it be that of my modem (192.168.1.1) or my router
>>> (192.168.2.1)? Or is it something completely different? Am at a loss
>>> here.
>>>
>>> Thanks,
>>> Doug