I have the following home network configuration :

  a.. a Netgear wireless router
  b.. a desktop connected to the router via an Ethernet cable
  c.. two laptops connected to the router via wireless cards
Internet works fine on all of them, but :

first laptop sees the desktop but not the second laptop and viceversa ( when I click on "view workgroup computers" ). In other words, the second laptop is not recognized.

the second laptop sees only the shared folder of the first one, but not the one on the desktop.

Pinging the second laptop gives a positive result, in fact both the desktop and first laptop can see the shared folder of the second laptop, when clicking "my network places".

What's going on ? What shall I do ?? I suspect this is due to the fact that the desktop is hardwired to to the router, whereas the laptops are connected wirelessly. Also, if I run the command "ipconfig /all", the node type is listed as "unknown" on the desktop and 1st laptop, "mixed" on 2nd laptop.

Please help me, this issue is getting on my nerves. Thanks !!

Mike

Mike wrote:

Show quoteHide quoteNo, it doesn't have anything to do with that some computers connect
wirelessly and some don't. The Node Type is also fine to be "unknown". You
didn't mention the operating systems and Service Pack levels if XP, so here
is some general information:

Check your firewalls. Run the Network Setup Wizard on all computers, making
sure to enable File & Printer Sharing, and reboot. The only "gotcha" is
that this will turn on the XPSP2 Windows Firewall. If you aren't running a
third-party firewall or have an antivirus with "Internet Worm
Protection" (like Norton 2005/06) which acts as a firewall, then you're
fine. If you have third-party firewall software, configure it to allow the
Local Area Network traffic as trusted. I usually do this with my firewalls
with an IP range. Ex. would be 192.168.1.0-192.168.1.254. Obviously you
would substitute your correct subnet.

If one or more of the computers is XP Pro:

a. If you need Pro's ability to set fine-grained permissions, turn off
Simple File Sharing (Folder Options>View tab) and create identical user
accounts/passwords on all computers.

b. If you don't care about using Pro's advanced features, leave the Simple
File Sharing enabled.

Simple File Sharing means that Guest (network) is enabled. This means that
anyone without a user account on the target system can use its resources.
This is a security hole but only you can decide if it matters in your
situation.

Then create shares as desired. XP Home does not permit sharing of users'
home directories (My Documents) or Program Files, but you can share folders
inside those directories. A better choice is to simply use the Shared
Documents folder.

If that doesn't work for you, here is an excellent network troubleshooter by
MVP Hans-Georg Michna. Take the time to go through it and it will usually
pinpoint the problem area(s) - http://winhlp.com/wxnet.htm

Malke

Two NICs, wireless dedicated for internet access
home networking Questions
No file sharing on wireless network
Wireless LAN Configuration Utility
DLINK DWL-G510 Installation
wireless not connecting
Lost internet connection
cannot renew IPCONFIG
Network Setup Wizard Help
How to Covert Linksys WRTP54G router into Access Point