"Lem" wrote:

> allen8106 wrote:
> > I have what I think is a pretty unique setup that I need help with. I get my
> > internet signal via a wireless tower 6 miles away. It comes through a grid
> > antenna, through a coax to a Cisco 350 series wireless lan adapter card. I
> > recently hooked up a Linksys WRT54G router. I am trying to get my laptop and
> > PDA to hit the internet via wireless and trying to get another computer to
> > hit the net via typical ethernet cable, all through the router. The only
> > thing I have managed to do is to get to the internet via the main computer
> > with the Cisco card in it. Any suggestions?
>
> I think you can do what you want with WinXP's "Internet Connection
> Sharing."  You will need a standard Ethernet NIC in the computer with
> the Cisco card.
>
> Do not use the WAN (Internet) port on the WRT54G, but connect one of the
> other ports to the NIC in the "gateway" computer (the one with the Cisco
> card).
>
> In the router's configuration utility, be sure to disable the router's
> DHCP server (ICS in the "gateway" computer will provide a DHCP server
> and NAT functionality).
>
> When you use ICS, the NIC in that computer gets a static IP address of
> 192.168.0.1.  The default IP address of Linksys routers is 192.168.1.1,
> which is on the wrong subnet, so you need to change it.  I don't know
> the range of IPs assigned by ICS; you could try setting the router to
> 192.168.0.2 and see if you get a conflict.  If you do, try
> 192.168.0.150.
>
> See http://support.microsoft.com/kb/314066/en-us
> and http://support.microsoft.com/kb/310563/en-us
> and many more:
> http://support.microsoft.com/search/default.aspx?catalog=LCID%3D1033&spid=1173&query=internet+connection+sharing&adv=
>

"yurko" <yu***@discussions.microsoft.com> wrote in message
news:86C7276F-FFE3-45E4-969F-A7057EFE2CB5@microsoft.com...
> my case is something similar but i can not have another 192.168.0.1 on my
> network. is there any way to change it to something else?
>
> y.
>
>
> "Lem" wrote:
>
>> allen8106 wrote:
>> > I have what I think is a pretty unique setup that I need help with. I
>> > get my
>> > internet signal via a wireless tower 6 miles away. It comes through a
>> > grid
>> > antenna, through a coax to a Cisco 350 series wireless lan adapter
>> > card. I
>> > recently hooked up a Linksys WRT54G router. I am trying to get my
>> > laptop and
>> > PDA to hit the internet via wireless and trying to get another computer
>> > to
>> > hit the net via typical ethernet cable, all through the router. The
>> > only
>> > thing I have managed to do is to get to the internet via the main
>> > computer
>> > with the Cisco card in it. Any suggestions?
>>
>> I think you can do what you want with WinXP's "Internet Connection
>> Sharing."  You will need a standard Ethernet NIC in the computer with
>> the Cisco card.
>>
>> Do not use the WAN (Internet) port on the WRT54G, but connect one of the
>> other ports to the NIC in the "gateway" computer (the one with the Cisco
>> card).
>>
>> In the router's configuration utility, be sure to disable the router's
>> DHCP server (ICS in the "gateway" computer will provide a DHCP server
>> and NAT functionality).
>>
>> When you use ICS, the NIC in that computer gets a static IP address of
>> 192.168.0.1.  The default IP address of Linksys routers is 192.168.1.1,
>> which is on the wrong subnet, so you need to change it.  I don't know
>> the range of IPs assigned by ICS; you could try setting the router to
>> 192.168.0.2 and see if you get a conflict.  If you do, try
>> 192.168.0.150.
>>
>> See http://support.microsoft.com/kb/314066/en-us
>> and http://support.microsoft.com/kb/310563/en-us
>> and many more:
>> http://support.microsoft.com/search/default.aspx?catalog=LCID%3D1033&spid=1173&query=internet+connection+sharing&adv=
>>

"Jack (MVP-Networking)." wrote:

> Hi
> You can change the core IP of the Router to any IP within the subnet
> 192.168.xxx.yyy, as long as the xxx group is the same as the rest of the
> Network and there is No other number that is exactly the same in the YYY
> group.
> How to do you  change the IP in your particular Router?  I Do know, I use
> something else, read the manual.
> Jack (MVP-Networking).
>
> "yurko" <yu***@discussions.microsoft.com> wrote in message
> news:86C7276F-FFE3-45E4-969F-A7057EFE2CB5@microsoft.com...
> > my case is something similar but i can not have another 192.168.0.1 on my
> > network. is there any way to change it to something else?
> >
> > y.
> >
> >
> > "Lem" wrote:
> >
> >> allen8106 wrote:
> >> > I have what I think is a pretty unique setup that I need help with. I
> >> > get my
> >> > internet signal via a wireless tower 6 miles away. It comes through a
> >> > grid
> >> > antenna, through a coax to a Cisco 350 series wireless lan adapter
> >> > card. I
> >> > recently hooked up a Linksys WRT54G router. I am trying to get my
> >> > laptop and
> >> > PDA to hit the internet via wireless and trying to get another computer
> >> > to
> >> > hit the net via typical ethernet cable, all through the router. The
> >> > only
> >> > thing I have managed to do is to get to the internet via the main
> >> > computer
> >> > with the Cisco card in it. Any suggestions?
> >>
> >> I think you can do what you want with WinXP's "Internet Connection
> >> Sharing."  You will need a standard Ethernet NIC in the computer with
> >> the Cisco card.
> >>
> >> Do not use the WAN (Internet) port on the WRT54G, but connect one of the
> >> other ports to the NIC in the "gateway" computer (the one with the Cisco
> >> card).
> >>
> >> In the router's configuration utility, be sure to disable the router's
> >> DHCP server (ICS in the "gateway" computer will provide a DHCP server
> >> and NAT functionality).
> >>
> >> When you use ICS, the NIC in that computer gets a static IP address of
> >> 192.168.0.1.  The default IP address of Linksys routers is 192.168.1.1,
> >> which is on the wrong subnet, so you need to change it.  I don't know
> >> the range of IPs assigned by ICS; you could try setting the router to
> >> 192.168.0.2 and see if you get a conflict.  If you do, try
> >> 192.168.0.150.
> >>
> >> See http://support.microsoft.com/kb/314066/en-us
> >> and http://support.microsoft.com/kb/310563/en-us
> >> and many more:
> >> http://support.microsoft.com/search/default.aspx?catalog=LCID%3D1033&spid=1173&query=internet+connection+sharing&adv=
> >>
>
>
>

"yurko" <yu***@discussions.microsoft.com> wrote in message
news:DFBB2635-3D68-40B6-84E9-DEAD5AE76525@microsoft.com...
> hi Jack, thanks for reply. Unfortunately i have to use something esle
> other
> then 192.168.0.1 for ICS host. I absolutely have to.
>
> what are my options?
>
>
> "Jack (MVP-Networking)." wrote:
>
>> Hi
>> You can change the core IP of the Router to any IP within the subnet
>> 192.168.xxx.yyy, as long as the xxx group is the same as the rest of the
>> Network and there is No other number that is exactly the same in the YYY
>> group.
>> How to do you  change the IP in your particular Router?  I Do know, I use
>> something else, read the manual.
>> Jack (MVP-Networking).
>>
>> "yurko" <yu***@discussions.microsoft.com> wrote in message
>> news:86C7276F-FFE3-45E4-969F-A7057EFE2CB5@microsoft.com...
>> > my case is something similar but i can not have another 192.168.0.1 on
>> > my
>> > network. is there any way to change it to something else?
>> >
>> > y.
>> >
>> >
>> > "Lem" wrote:
>> >
>> >> allen8106 wrote:
>> >> > I have what I think is a pretty unique setup that I need help with.
>> >> > I
>> >> > get my
>> >> > internet signal via a wireless tower 6 miles away. It comes through
>> >> > a
>> >> > grid
>> >> > antenna, through a coax to a Cisco 350 series wireless lan adapter
>> >> > card. I
>> >> > recently hooked up a Linksys WRT54G router. I am trying to get my
>> >> > laptop and
>> >> > PDA to hit the internet via wireless and trying to get another
>> >> > computer
>> >> > to
>> >> > hit the net via typical ethernet cable, all through the router. The
>> >> > only
>> >> > thing I have managed to do is to get to the internet via the main
>> >> > computer
>> >> > with the Cisco card in it. Any suggestions?
>> >>
>> >> I think you can do what you want with WinXP's "Internet Connection
>> >> Sharing."  You will need a standard Ethernet NIC in the computer with
>> >> the Cisco card.
>> >>
>> >> Do not use the WAN (Internet) port on the WRT54G, but connect one of
>> >> the
>> >> other ports to the NIC in the "gateway" computer (the one with the
>> >> Cisco
>> >> card).
>> >>
>> >> In the router's configuration utility, be sure to disable the router's
>> >> DHCP server (ICS in the "gateway" computer will provide a DHCP server
>> >> and NAT functionality).
>> >>
>> >> When you use ICS, the NIC in that computer gets a static IP address of
>> >> 192.168.0.1.  The default IP address of Linksys routers is
>> >> 192.168.1.1,
>> >> which is on the wrong subnet, so you need to change it.  I don't know
>> >> the range of IPs assigned by ICS; you could try setting the router to
>> >> 192.168.0.2 and see if you get a conflict.  If you do, try
>> >> 192.168.0.150.
>> >>
>> >> See http://support.microsoft.com/kb/314066/en-us
>> >> and http://support.microsoft.com/kb/310563/en-us
>> >> and many more:
>> >> http://support.microsoft.com/search/default.aspx?catalog=LCID%3D1033&spid=1173&query=internet+connection+sharing&adv=
>> >>
>>
>>
>>