"bryan45" <brya***@discussions.microsoft.com> wrote in message
news:C6C31CC5-82A7-4FAC-AC16-45A7D457E338@microsoft.com...
>I have set up a home wireless network. On my laptop which is connected to
>the
> network I have set the Internet Protocol(TCP/IP)Properties to "Use the
> following IP address" and filled in the IP address and the DNS address.
> The
> wireless connection now works. However every time I switch off the laptop
> then switch it on again the
> Internet Protocol(TCP/IP)Properties have gone back to "Obtain an IP
> address
> automatically" and I have to reset all the addresses again manually. I am
> told that the addresses should be saved automatically. Can anyone advise
> why
> this is not happening?
>
> Thanks
>
> Bryan

"Jack (MVP-Networking)." wrote:

> Hi
> Make sure that Windows Zero Configuration and the Original Manufacturer
> software are not running in tandem.
> My New Wireless does not work - http://www.ezlan.net/wireless.html
> Jack (MVP-Networking).
>
> "bryan45" <brya***@discussions.microsoft.com> wrote in message
> news:C6C31CC5-82A7-4FAC-AC16-45A7D457E338@microsoft.com...
> >I have set up a home wireless network. On my laptop which is connected to
> >the
> > network I have set the Internet Protocol(TCP/IP)Properties to "Use the
> > following IP address" and filled in the IP address and the DNS address.
> > The
> > wireless connection now works. However every time I switch off the laptop
> > then switch it on again the
> > Internet Protocol(TCP/IP)Properties have gone back to "Obtain an IP
> > address
> > automatically" and I have to reset all the addresses again manually. I am
> > told that the addresses should be saved automatically. Can anyone advise
> > why
> > this is not happening?
> >
> > Thanks
> >
> > Bryan
>
>
>

"bryan45" <brya***@discussions.microsoft.com> wrote in message
news:486E1750-030C-4DE5-B1C9-795688088F5F@microsoft.com...
> Hi Jack,
>
> I have checked and the Windows Zero Configuration is running.
>
> Should I stop it? If so how would I do this?
>
> Thanks
>
> Bryan
>
> "Jack (MVP-Networking)." wrote:
>
>> Hi
>> Make sure that Windows Zero Configuration and the Original Manufacturer
>> software are not running in tandem.
>> My New Wireless does not work - http://www.ezlan.net/wireless.html
>> Jack (MVP-Networking).
>>
>> "bryan45" <brya***@discussions.microsoft.com> wrote in message
>> news:C6C31CC5-82A7-4FAC-AC16-45A7D457E338@microsoft.com...
>> >I have set up a home wireless network. On my laptop which is connected
>> >to
>> >the
>> > network I have set the Internet Protocol(TCP/IP)Properties to "Use the
>> > following IP address" and filled in the IP address and the DNS address.
>> > The
>> > wireless connection now works. However every time I switch off the
>> > laptop
>> > then switch it on again the
>> > Internet Protocol(TCP/IP)Properties have gone back to "Obtain an IP
>> > address
>> > automatically" and I have to reset all the addresses again manually. I
>> > am
>> > told that the addresses should be saved automatically. Can anyone
>> > advise
>> > why
>> > this is not happening?
>> >
>> > Thanks
>> >
>> > Bryan
>>
>>
>>

"Jack (MVP-Networking)." wrote:

> Hi
> Should you prefer using WZC, this might help in disabling the original
> utility,  http://www.ezlan.net/infestation#process
> Switching WZC On or Off here, , http://www.ezlan.net/wzc.html
> Jack (MVP-Networking).
>
> "bryan45" <brya***@discussions.microsoft.com> wrote in message
> news:486E1750-030C-4DE5-B1C9-795688088F5F@microsoft.com...
> > Hi Jack,
> >
> > I have checked and the Windows Zero Configuration is running.
> >
> > Should I stop it? If so how would I do this?
> >
> > Thanks
> >
> > Bryan
> >
> > "Jack (MVP-Networking)." wrote:
> >
> >> Hi
> >> Make sure that Windows Zero Configuration and the Original Manufacturer
> >> software are not running in tandem.
> >> My New Wireless does not work - http://www.ezlan.net/wireless.html
> >> Jack (MVP-Networking).
> >>
> >> "bryan45" <brya***@discussions.microsoft.com> wrote in message
> >> news:C6C31CC5-82A7-4FAC-AC16-45A7D457E338@microsoft.com...
> >> >I have set up a home wireless network. On my laptop which is connected
> >> >to
> >> >the
> >> > network I have set the Internet Protocol(TCP/IP)Properties to "Use the
> >> > following IP address" and filled in the IP address and the DNS address.
> >> > The
> >> > wireless connection now works. However every time I switch off the
> >> > laptop
> >> > then switch it on again the
> >> > Internet Protocol(TCP/IP)Properties have gone back to "Obtain an IP
> >> > address
> >> > automatically" and I have to reset all the addresses again manually. I
> >> > am
> >> > told that the addresses should be saved automatically. Can anyone
> >> > advise
> >> > why
> >> > this is not happening?
> >> >
> >> > Thanks
> >> >
> >> > Bryan
> >>
> >>
> >>
>
>
>