Wireless USB adaptor

11 Dec 2006 5:12 AM

Xbl Jean-Paul

My usb adaptor is connected and the driver is installed. I had not trouble
with it for a while and now it does not work and I get a

Code[10] device will not start

message out of no where. How does that work out?

11 Dec 2006 5:49 AM

Jack (MVP-Networking).

Hi
Look at the device manger and make sure that the card is installed correctly
and there is No Ghost.
What is Ghost Hardware Installation? http://www.ezlan.net/faq#ghost
Jack (MVP-Networking).

Show quoteHide quote

"Xbl Jean-Paul" <Xbl Jean-P***@discussions.microsoft.com> wrote in message
news:F77E38C0-105E-466E-B651-3337C4B095B2@microsoft.com...
> My usb adaptor is connected and the driver is installed. I had not trouble
> with it for a while and now it does not work and I get a
>
> Code[10] device will not start
>
>
> message out of no where. How does that work out?

11 Dec 2006 9:04 AM

ato_zee

On 11-Dec-2006, =?Utf-8?B?WGJsIEplYW4tUGF1bA==?= <Xbl
Jean-P***@discussions.microsoft.com> wrote:

> My usb adaptor is connected and the driver is installed. I had not trouble
> with it for a while and now it does not work and I get a
> Code[10] device will not start
> message out of no where. How does that work out?

Have you unplugged it from the USB port, waited a couple of
minutes, and plugged it in again? USB port should see it
reconnected and then re-start the connection. My USB
wireless adapter is on a 2-way USB
switch, for 2 PC's. I can also hot
swap my USB external backup drive.
Does Start -> Connect to show your network connection?
You could also try creating another connection, using
the wizard, or using another USB port.