|
windows
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
can't get IE to connectI am attempting to share an internet connection wirelessly with a desktop
computer running xp. I have verizon dsl and currently have a laptop (running vista) connected to the internet wirelessly. The desktop wireless network card is up and running. I can see the laptop in the network but whenever I attempt to connect to IE I get the dreaded message that IE cannot display this webpage. ugggg! help! I have done this before but the host computer was wired to the router/modem. Am I overlooking something here. Thanks. Hi
I assume that now you do not have a Wireless Router. The computer that currently is connected to the Internet need a second Wireless card. You have to establish Wireless Ad-Hoc connection between the two computers and then use Windows ICS to Route the signal from the Host computer to the client computer. This is an old article that describes the process for older systems. The principle is the same for what you have now. The menus in Vista might look differently. You can search the native help for the terms involved and find out the exact location of the settings in Vista. http://www.microsoft.com/windowsxp/using/networking/expert/bowman_02april08.mspx If you do have a Wireless Router than ignore the above. In case of a Wireless Router each computer whether it is Wired or Wireless connects to the Router on its own there is No host and No relation between the computer from the Internet perspective. Jack (MS, MVP-Networking) Show quoteHide quote "rc" <rc@home> wrote in message news:OKsQLYmeJHA.5932@TK2MSFTNGP03.phx.gbl... >I am attempting to share an internet connection wirelessly with a desktop >computer running xp. I have verizon dsl and currently have a laptop >(running vista) connected to the internet wirelessly. The desktop wireless >network card is up and running. I can see the laptop in the network but >whenever I attempt to connect to IE I get the dreaded message that IE >cannot display this webpage. ugggg! help! I have done this before but >the host computer was wired to the router/modem. Am I overlooking >something here. Thanks. > Thanks. I apologize for omitting the fact that I do have a wireless router.
How would I go about setting that up. I keep getting ip address starting with 169 as opposed to 192. I'm assuming my configuration is screwed up somehow. Its a Westell modem/router and I have done this before with a wired host computer and a wireless client. Show quoteHide quote "Jack (MVP-Networking)." <j***@discussiongroup.com> wrote in message news:ODxqtQoeJHA.5040@TK2MSFTNGP02.phx.gbl... > Hi > I assume that now you do not have a Wireless Router. > The computer that currently is connected to the Internet need a second > Wireless card. > You have to establish Wireless Ad-Hoc connection between the two computers > and then use Windows ICS to Route the signal from the Host computer to the > client computer. > This is an old article that describes the process for older systems. The > principle is the same for what you have now. > The menus in Vista might look differently. You can search the native help > for the terms involved and find out the exact location of the settings in > Vista. > http://www.microsoft.com/windowsxp/using/networking/expert/bowman_02april08.mspx > If you do have a Wireless Router than ignore the above. In case of a > Wireless Router each computer whether it is Wired or Wireless connects to > the Router on its own there is No host and No relation between the > computer from the Internet perspective. > Jack (MS, MVP-Networking) > > "rc" <rc@home> wrote in message > news:OKsQLYmeJHA.5932@TK2MSFTNGP03.phx.gbl... >>I am attempting to share an internet connection wirelessly with a desktop >>computer running xp. I have verizon dsl and currently have a laptop >>(running vista) connected to the internet wirelessly. The desktop >>wireless network card is up and running. I can see the laptop in the >>network but whenever I attempt to connect to IE I get the dreaded message >>that IE cannot display this webpage. ugggg! help! I have done this >>before but the host computer was wired to the router/modem. Am I >>overlooking something here. Thanks. >> >
Show quote
Hide quote
On Jan 20, 2:21 pm, "rc" <rc@home> wrote: The 169 address is indicating that your PC is not responding to the> Thanks. I apologize for omitting the fact that I do have a wireless router. > How would I go about setting that up. I keep getting ip address starting > with 169 as opposed to 192. I'm assuming my configuration is screwed up > somehow. Its a Westell modem/router and I have done this before with a > wired host computer and a wireless client."Jack (MVP-Networking)." <j***@discussiongroup.com> wrote in message > > news:ODxqtQoeJHA.5040@TK2MSFTNGP02.phx.gbl... > > > Hi > > I assume that now you do not have a Wireless Router. > > The computer that currently is connected to the Internet need a second > > Wireless card. > > You have to establish Wireless Ad-Hoc connection between the two computers > > and then use Windows ICS to Route the signal from the Host computer to the > > client computer. > > This is an old article that describes the process for older systems. The > > principle is the same for what you have now. > > The menus in Vista might look differently. You can search the native help > > for the terms involved and find out the exact location of the settings in > > Vista. > >http://www.microsoft.com/windowsxp/using/networking/expert/bowman_02a... > > If you do have a Wireless Router than ignore the above. In case of a > > Wireless Router each computer whether it is Wired or Wireless connects to > > the Router on its own there is No host and No relation between the > > computer from the Internet perspective. > > Jack (MS, MVP-Networking) > > > "rc" <rc@home> wrote in message > >news:OKsQLYmeJHA.5932@TK2MSFTNGP03.phx.gbl... > >>I am attempting to share an internet connection wirelessly with a desktop > >>computer running xp. I have verizon dsl and currently have a laptop > >>(running vista) connected to the internet wirelessly. The desktop > >>wireless network card is up and running. I can see the laptop in the > >>network but whenever I attempt to connect to IE I get the dreaded message > >>that IE cannot display this webpage. ugggg! help! I have done this > >>before but the host computer was wired to the router/modem. Am I > >>overlooking something here. Thanks. wireless router's DHCP server (service to assign LAN IP address.) You may need to access the router's configuration pages, via the true IP address of the network gateway. How do i do that without an internet connection?
Show quoteHide quote "smlunatick" <yves***@gmail.com> wrote in message The 169 address is indicating that your PC is not responding to thenews:e4724d41-8c5d-4012-a814-7c70f7463bab@f29g2000vbf.googlegroups.com... On Jan 20, 2:21 pm, "rc" <rc@home> wrote: > Thanks. I apologize for omitting the fact that I do have a wireless > router. > How would I go about setting that up. I keep getting ip address starting > with 169 as opposed to 192. I'm assuming my configuration is screwed up > somehow. Its a Westell modem/router and I have done this before with a > wired host computer and a wireless client."Jack (MVP-Networking)." > <j***@discussiongroup.com> wrote in message > > news:ODxqtQoeJHA.5040@TK2MSFTNGP02.phx.gbl... > > > Hi > > I assume that now you do not have a Wireless Router. > > The computer that currently is connected to the Internet need a second > > Wireless card. > > You have to establish Wireless Ad-Hoc connection between the two > > computers > > and then use Windows ICS to Route the signal from the Host computer to > > the > > client computer. > > This is an old article that describes the process for older systems. The > > principle is the same for what you have now. > > The menus in Vista might look differently. You can search the native > > help > > for the terms involved and find out the exact location of the settings > > in > > Vista. > >http://www.microsoft.com/windowsxp/using/networking/expert/bowman_02a... > > If you do have a Wireless Router than ignore the above. In case of a > > Wireless Router each computer whether it is Wired or Wireless connects > > to > > the Router on its own there is No host and No relation between the > > computer from the Internet perspective. > > Jack (MS, MVP-Networking) > > > "rc" <rc@home> wrote in message > >news:OKsQLYmeJHA.5932@TK2MSFTNGP03.phx.gbl... > >>I am attempting to share an internet connection wirelessly with a > >>desktop > >>computer running xp. I have verizon dsl and currently have a laptop > >>(running vista) connected to the internet wirelessly. The desktop > >>wireless network card is up and running. I can see the laptop in the > >>network but whenever I attempt to connect to IE I get the dreaded > >>message > >>that IE cannot display this webpage. ugggg! help! I have done this > >>before but the host computer was wired to the router/modem. Am I > >>overlooking something here. Thanks. wireless router's DHCP server (service to assign LAN IP address.) You may need to access the router's configuration pages, via the true IP address of the network gateway.
Show quote
Hide quote
On Jan 20, 3:52 pm, "rc" <rc@home> wrote: Connect a PC with an Ethernet cable to the router. Then, access the> How do i do that without an internet connection?"smlunatick" <yves***@gmail.com> wrote in message > > news:e4724d41-8c5d-4012-a814-7c70f7463bab@f29g2000vbf.googlegroups.com... > On Jan 20, 2:21 pm, "rc" <rc@home> wrote: > > > > > Thanks. I apologize for omitting the fact that I do have a wireless > > router. > > How would I go about setting that up. I keep getting ip address starting > > with 169 as opposed to 192. I'm assuming my configuration is screwed up > > somehow. Its a Westell modem/router and I have done this before with a > > wired host computer and a wireless client."Jack (MVP-Networking)." > > <j***@discussiongroup.com> wrote in message > > >news:ODxqtQoeJHA.5040@TK2MSFTNGP02.phx.gbl... > > > > Hi > > > I assume that now you do not have a Wireless Router. > > > The computer that currently is connected to the Internet need a second > > > Wireless card. > > > You have to establish Wireless Ad-Hoc connection between the two > > > computers > > > and then use Windows ICS to Route the signal from the Host computer to > > > the > > > client computer. > > > This is an old article that describes the process for older systems. The > > > principle is the same for what you have now. > > > The menus in Vista might look differently. You can search the native > > > help > > > for the terms involved and find out the exact location of the settings > > > in > > > Vista. > > >http://www.microsoft.com/windowsxp/using/networking/expert/bowman_02a.... > > > If you do have a Wireless Router than ignore the above. In case of a > > > Wireless Router each computer whether it is Wired or Wireless connects > > > to > > > the Router on its own there is No host and No relation between the > > > computer from the Internet perspective. > > > Jack (MS, MVP-Networking) > > > > "rc" <rc@home> wrote in message > > >news:OKsQLYmeJHA.5932@TK2MSFTNGP03.phx.gbl... > > >>I am attempting to share an internet connection wirelessly with a > > >>desktop > > >>computer running xp. I have verizon dsl and currently have a laptop > > >>(running vista) connected to the internet wirelessly. The desktop > > >>wireless network card is up and running. I can see the laptop in the > > >>network but whenever I attempt to connect to IE I get the dreaded > > >>message > > >>that IE cannot display this webpage. ugggg! help! I have done this > > >>before but the host computer was wired to the router/modem. Am I > > >>overlooking something here. Thanks. > > The 169 address is indicating that your PC is not responding to the > wireless router's DHCP server (service to assign LAN IP address.) You > may need to access the router's configuration pages, via the true IP > address of the network gateway. router's web pages and look at the wireless network settings. You should then be able to find info on setting up the wireless on your second PC. If you, you are out of luck since you will need to do a factory reset of the router. This will clear out most problem settings as well as all settings for the wireless network and Internet access. You would then have to completely re-do the configurations.
Can't get the internet from the client computer on an ad hoc netwo
connecting second computer to printer using wireless connection? IE will not work through wireless safety using wireless in hotels Will not Shutdown after Wireles PCI Card Installation Help:How to make two or more wireless connection items in Network Connections? Bluetooth: Adding "File Transfer" Service? How to delete Wireless Ad Hoc made with wizard PHOTO X-RAY BAGS AROUND THE ROUTER ANTENNA Network magic site is all screwed up. |
|||||||||||||||||||||||