Home All Groups Group Topic Archive Search About

WPA2 - are new card drivers needed or just a client?

Author
19 Apr 2005 1:18 PM
Mike Bernstein
I have a wireless router that, following a firmware upgrade, can be set to
WPA2. I also have client software (Funk Odyssey) that can be set to WPA2. Do
I also need new cards or updated drivers for my existing cards to get this
to work (all are D-Link)?

Mike Bernstein

Author
19 Apr 2005 3:06 PM
Arkady Frenkel
Yes , you have to download driver because Func will use WPA2 OIDs of MSFT
for communication with driver
Arkady

Show quoteHide quote
"Mike Bernstein" <mike.bernst***@REMOVECAPSchemlaw.co.uk> wrote in message
news:uL0xxIORFHA.2976@TK2MSFTNGP10.phx.gbl...
>I have a wireless router that, following a firmware upgrade, can be set to
>WPA2. I also have client software (Funk Odyssey) that can be set to WPA2.
>Do I also need new cards or updated drivers for my existing cards to get
>this to work (all are D-Link)?
>
> Mike Bernstein
>
Author
25 Apr 2005 9:27 PM
Oliver Saal [MS]
Actually, you'll most likely need new wireless NICs since WPA2 involves some
hardware changes to the wireless radio. For most users, their older wireless
NICS will not support WPA2 directly. Unlike WPA, WPA2 is not just a firmware
update to enable this technology.

--
Oliver
This posting is provided "AS IS", with NO warranties and confers NO rights
-----------------------------------------------------------------------------

Show quoteHide quote
"Arkady Frenkel" <arka***@hotmailxdotx.com> wrote in message
news:OfbylhORFHA.576@TK2MSFTNGP15.phx.gbl...
> Yes , you have to download driver because Func will use WPA2 OIDs of MSFT
> for communication with driver
> Arkady
>
> "Mike Bernstein" <mike.bernst***@REMOVECAPSchemlaw.co.uk> wrote in message
> news:uL0xxIORFHA.2976@TK2MSFTNGP10.phx.gbl...
>>I have a wireless router that, following a firmware upgrade, can be set to
>>WPA2. I also have client software (Funk Odyssey) that can be set to WPA2.
>>Do I also need new cards or updated drivers for my existing cards to get
>>this to work (all are D-Link)?
>>
>> Mike Bernstein
>>
>
>