> Hi,
>
> I have a laptop to access a wireless network and I have a built-in wireless
> adapter and also a PCMCIA wireless adapter. I have two questions concerning
> this.
>
> #1.  Is it ok to leave them both running at the same time?  For some reason,
> the built-in sometimes has a stronger signal but it frequently disconnects
> and reconnects.
>
> #2.  The reason am so aware of these connects and disconnects is that the
> informational Ballons keep popping up from my System Tray. I am talking
> about CONSTANT (usually a couple of times each minute) messages and they are
> very distracting. Is there any way to disable to Ballons without removing
> the Systray Connection Icon altogether?
>
> Now that I think of it, I have one more question so I guess this would be
> #3.
>
> I am unable to determine which one works best.  The built-in adapter tells
> me that the connection strength is Good or Excellent but is only showing a
> speed of 1.0 to 5.5 Mbps.  The PCMCIA card shows signal strength of Very Low
> but shows a speed of 11.0 Mbps.  In that situation, which one is more
> capable of transfering data.  That leads back to question #1. Do I get
> better connectivity by running them both at the same time>  BTW, my PCMCIA
> card is a 54 Mbps card but the WAP is only 11 Mbps.
>
> Thanks,
>
> Tom
>
>
>

"prashanth" <prasha***@discussions.microsoft.com> wrote in message
news:56A7625C-7200-4EC6-A8D9-0ECF8E05A55E@microsoft.com...
> Hello
>
> For q1: You can use both at a time ,there is nothing wrong in that.
>
> q2: Click on the network connections in the control panel,select the
> network
> adapter from the "lan or high speed internet" then right click and select
> properties on the network connection that you dont want to notify when
> disconnected.
>
> clear the check box " notify me when the connection has limited or no
> connectivity"
>
> this will help you from distraction.
>
> q3: There wont be any increase in the speed if you use one or two at a
> time.your PCMIA card is 54mbps and built card is 11mbps ,so your pcmia
> card
> is obviously faster . Here again ,your network should support 54mbps for
> that
> speed(I mean you should have 54mbps wireless router for your 54mbps pcmia
> card to work at higher speeds).we need to consider the signal strengths
> ,the
> better the signal the more the data transfer.your built adapter shows good
> signal strength at lower speeds,so builtin card is better for you.
>
> Hope your are clear with your wi-fi questions . . !
>
>
> Brown" wrote:
>
>> Hi,
>>
>> I have a laptop to access a wireless network and I have a built-in
>> wireless
>> adapter and also a PCMCIA wireless adapter. I have two questions
>> concerning
>> this.
>>
>> #1.  Is it ok to leave them both running at the same time?  For some
>> reason,
>> the built-in sometimes has a stronger signal but it frequently
>> disconnects
>> and reconnects.
>>
>> #2.  The reason am so aware of these connects and disconnects is that the
>> informational Ballons keep popping up from my System Tray. I am talking
>> about CONSTANT (usually a couple of times each minute) messages and they
>> are
>> very distracting. Is there any way to disable to Ballons without removing
>> the Systray Connection Icon altogether?
>>
>> Now that I think of it, I have one more question so I guess this would be
>> #3.
>>
>> I am unable to determine which one works best.  The built-in adapter
>> tells
>> me that the connection strength is Good or Excellent but is only showing
>> a
>> speed of 1.0 to 5.5 Mbps.  The PCMCIA card shows signal strength of Very
>> Low
>> but shows a speed of 11.0 Mbps.  In that situation, which one is more
>> capable of transfering data.  That leads back to question #1. Do I get
>> better connectivity by running them both at the same time>  BTW, my
>> PCMCIA
>> card is a 54 Mbps card but the WAP is only 11 Mbps.
>>
>> Thanks,
>>
>> Tom
>>
>>
>>

"Tom Brown" wrote:

> Prashanth,

> But, unfortunately, I got lost in your tips on Q2.  I was unable to find any
> of the options that you mentioned in any of the Properties dialogues.  I
> think I recall seeing them in the past but I was not able to find them now.
> Tom

> > q2: Click on the network connections in the control panel,select the
> > network
> > adapter from the "lan or high speed internet" then right click and select
> > properties on the network connection that you dont want to notify when
> > disconnected.
> >
> > clear the check box " notify me when the connection has limited or no
> > connectivity"

> >>
> >> #2.  The reason am so aware of these connects and disconnects is that the
> >> informational Ballons keep popping up from my System Tray. I am talking
> >> about CONSTANT (usually a couple of times each minute) messages and they
> >> are
> >> very distracting. Is there any way to disable to Ballons without removing
> >> the Systray Connection Icon altogether?
> >>
> >> Now that I think of it, I have one more question so I guess this would be