I have connected my cable modem to cnet wireless router, wan lights are on
and seems to be working. (Not connected to my desktop yet.)
My laptop is telling me that I am connected and I have a strong signal. When
opening my browser, nothing!
My cable company has told me that I do not need their software installed on
my laptop to access the internet, is this true?
What should I do next.........
I am struggling to comprehend my new toy
S

You did not give a lot of information, but you probably do not need the
software installed.  Is it PPPoE or something else, and does your router do
that?  You may need to hard wire your laptop to get it set up.  How do you
have the system set up as far as IP addresses, including DNS, and WEP
settings.

Clark

Show quoteHide quote

Don't know anything about cnet router but...
sadsy wrote:
Are you able to use your browser to see your router? Read your documentation for
the http://??? address. This is where you do the router setup. It's important
you don't just operate the wireless AP as is out of the box. (security)
If you are running XP you usually don't need any other software for your network
or the Internet. You should also be able to use your browser to see the cable
modem setup pages. Again see your documentation for the http://??? address. That
page should tell you if the modem is seeing the Internet. If you continue to
struggle... connect your laptop directly to the modem to make sure you can see
the Internet that way. (with CAT5 cable) Then cable directly into the router
(not wireless) and see if you can see the Internet that way. If you are running
XP the laptop should connect automatically. (maybe almost automatically)
Finally... are you running a firewall program? If so and it's Norton... make
sure you run the network wizard. (while you are hooked up to the AP which is
hooked up to the modem) That reminds me. Are you sure you connected the AP to
the modem correctly. Make sure the cable between the modem and AP is plugged
into the correct port on the AP.

Show quoteHide quote

Yes this can be true. For example, your cable modem can be configured
so that just the standard Windows PPPoE connection will work.
That would popup a logon dialog, then type your username and password to
proceed.

a. Ask your cable company for exact, step by step instructions
(and be ready to follow them...)

b. Try to start without the wireless part.
Remove the wireless router and connect your PC with cable modem with an
ethernet cable.  Get it working perfectly.
Then replace ethernet with wireless.

Regards,
--PA

Thanks guys and sorry but everything is on hold at the moment, to much to
do. I will try to get back to you soon.
        S
Show quoteHide quote

Wireless networks with Hidden SSID's
Wireless + Wired
Wireless connexion very slow
Wireless LAN speed
DSL Connection
Can't share files
File and Printer sharing on wireless network
Windows 2003 Server "Wireless Monitor" mmc
Wireless Networking in Windows 2000
connexion wifi intermitente